Configuration   Z-Wave


Topic Replies Activity
Not able to inclusion QUBINO ZMNHTDx in HA v0.103.6 RPi 1 January 11, 2020
Does anybody here use the Popp keypad? 1 January 11, 2020
Use for power consumtion in fibaro 2 January 10, 2020
Fibaro Flood Sensor Customization 19 January 10, 2020
Zwave / Restoring after Disaster 10 January 10, 2020
Inconsistent Zwave performance 2 January 10, 2020
Renson healthbox 3.0 9 January 10, 2020
Motion automation not working after update 7 January 10, 2020
[SOLVED] Radio Thermostat CT32 Target Temperature Setpoint Not Working 6 January 10, 2020
Eurotronic Spirit temperature not changing 73 January 9, 2020
Set light dimmer level based on 2 January 9, 2020
Muddled up entity under device 5 January 9, 2020
Best Z-Wave dongle for Raspberry Pi 4 12 January 9, 2020
Z-Wave Secondary Controller 1 January 9, 2020
Qubino 3-phase meter ZMNHXDx reporting 0 in all sensors 21 January 8, 2020
Bought a fibaro home center for firmware, should I keep it? 2 January 8, 2020
ID Lock 150 3 January 8, 2020
Dimmer reporting back incorrectly 4 January 8, 2020
Issues with Xiaomi Gateway (lumi.gateway.v3) 1 January 8, 2020
Pi 4 setup with Razberry V2 (Solved) 4 January 7, 2020
Restoring Zwave config 1 January 7, 2020
Creating automation with Z-Wave.Me ZME_WALLC-S Secure Wall Controller 13 January 7, 2020
Reading status from Z-wave device in one network to device in another network (alarm.com)? 3 January 7, 2020
Thinking of Bailing 245 January 6, 2020
TKB TZ56S added as TZ66D 1 January 6, 2020
Can you configure a Z-Wave node to not be a repeater? 2 January 6, 2020
OZW stuck on "Starting Z-Wave Network... This may take a while depending on the size of your network." 56 January 6, 2020
HA with ZME_UZB1 added to SmartThings Z-Wave network? 6 January 6, 2020
Do I need a fibaro hub to use fibaro z wave devices? 5 January 6, 2020
Anyone want to share your most helpful tips for migrating from wink to a zwave stick? 5 January 6, 2020