I was running the 2024 version in a container on a synology.
One of the bindings is to a ow-server on another raspberry pi with 33 items (8 counters and 25 temp sensors).
Next to homeassistant there are some scripts on the pi that use 1-wire (mostly via ‘cat /mnt/1-wire/address_of_sensor’ (approx 3 readings per 5 min)
Since the update to 2025-3.0 I’m getting errors from these scripts. (approx 8 errors/day)
I have a feedling that since the upgrade the “load” on ow-server has increased.
Is this a known problem? And what could i do about it?