Amcrest Motion Tracking (Auto Tracking)

I have an Amcrest camera that is capable of motion tracking that follows a moving object when enabled.

However, the motion tracking only works if Motion Detection is enabled through the camera’s webUI (with Auto Tracking enabled).

Even if the “Auto Tracking” feature is enabled on the webUI, when motion detection is triggered on Home Assistant, Auto Tracking doesn’t work.

This can be a good addition to camera integration if your camera is capable of motion tracking.

Never mind. I got it working with Home Assistant after updating the firmware and Factory Resetting the camera.

Factory Resetting the camera is very important, or else the motion tracking will not enable when motion detection is activated / enabled on Home Assistant. :slight_smile: