Cannot get 2 x sensors showing in ESPHome via Pico W

ESPHome
1

Hi there,
I have a working setup of a pi 4, pico w and wired (correctly i think) to two sensors. ESPHome sees the pico and the yaml file looks correct but this is my first foray into any of this and kinda stuck (and frustrated because it was going so well…). My robo mower has arrived and I’ve told myself i’m not allowed to open it until i get these sensors working :clown_face:

the log in ESPhome points to an API issue and I can’t find much reference to it here or discord…

WARNING Can’t connect to ESPHome API for poduce-pico-1 @ 192.168.0.157: Error connecting to [AddrInfo(family=<AddressFamily.AF_INET: 2>, type=<SocketKind.SOCK_STREAM: 1>, proto=6, sockaddr=IPv4Sockaddr(address=‘192.168.0.157’, port=6053))]: [Errno 111] Connect call failed (‘192.168.0.157’, 6053) (SocketAPIError)
INFO Trying to connect to poduce-pico-1 @ 192.168.0.157 in the background

2

Hello jono,
Welcome to the Home Assistant Forum!

There may be a solution but there is a slight problem.

It makes it much easier for us to offer constructive answers if you follow Community Guidelines #9. 11, & 14 by supplying a properly formatted configuration for what you have attempted. Please share the YAML and any errors so we can see what you’ve done.

Also another place to ask espHome questions is here:

ESPhome Discord

3

Thank you, I am asking in Discord now. I have looked at the guidelines, and will add more detail here later.

Have updated the first post with error from log showing API issue…perhaps the smoking gnu ?

1 Like