Constant errors in supervisor logs

Installation
1

Hi All,

I just checked my supervisor logs today and I see this error constantly scrolling. I only have one usb device plugged in and the error occurs still when I disconnect.

Thanks in advance

2025-04-23 21:57:47.907 WARNING (MainThread) [supervisor.hardware.monitor] Ignore device /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3 / failes to initialize by udev

2025-04-23 21:57:50.014 WARNING (MainThread) [supervisor.hardware.monitor] Ignore device /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3 / failes to initialize by udev

2025-04-23 21:57:50.015 WARNING (MainThread) [supervisor.hardware.monitor] Ignore device /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3 / failes to initialize by udev

2025-04-23 21:57:52.117 WARNING (MainThread) [supervisor.hardware.monitor] Ignore device /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3 / failes to initialize by udev

2025-04-23 21:57:52.118 WARNING (MainThread) [supervisor.hardware.monitor] Ignore device /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3 / failes to initialize by udev

2025-04-23 21:57:54.225 WARNING (MainThread) [supervisor.hardware.monitor] Ignore device /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3 / failes to initialize by udev

2

Hello dan,

It says it’s a USB device.
Do you have anything plugged in?

3

SSH into your Home Assistant host computer and run lsusb.

4

USB devices can also be USB hubs (including the internal ones on the motherboard).

5

IMG_0111
IMG_01111320×2868 301 KB