Deconz not functional after updating to HassOS 4.8

[xbmcnut]

This might help? Happened to me again after 4.8 update.

deCONZ - Official thread

How to get deCONZ working again after a reboot or supervisor upgrade. *This is based on my experience with a Conbee II connected to a USB port on an Intel NUC Check if add-on is running If stopped, adjust config to other port (say to /dev/ttyACM0 from /dev/ttyACM1 ) and restart add-on. Note that your port may differ. Check the deCONZ logs to see if your Zigbee device was detected but note that even though the logs may report that it has found your hardware, this is no guarantee that deCONZ is…

[Sven_S]

For me everything is working agaein after the kernel downgrade.