Foxess Hub G2 + AIO-H1 (US)

[harshsb714 (Harsh)]

Hello everyone,

This is my first time using Home Assistant and the first thing I tried to do was to connect my Foxess solar + Battery backup to it. Unfortunately, I found all the information for European and Asian connection but nothing for anything in the US. So asking the question here if anyone has Foxess system in the States and if they have/were able to successfully connect it to Home Assistant?

[harshsb714 (Harsh)]

So after waiting to hear back from the community, I decided to tackle this problem and see how I could build out a solution for it.

Sharing it with the community here:

• FoxESS Add-On for HAOS: GitHub - HarshBhardwaj/foxess-add-on: Runs the local FoxESS Smart WiLAN → MQTT bridge directly on your Home Assistant machine. It reads your inverter over the LAN (no FoxCloud) and publishes ~21 sensors via MQTT Discovery, so a **FoxESS** device appears automatically in Home Assistant. Broker credentials are pulled from the Home Assistant MQTT service — you don't configure them here. · GitHub
• FoxESS SDK: GitHub - HarshBhardwaj/foxess-local: A fully-local, evidence-first Python SDK for FoxESS "Smart WiLAN" devices (e.g. Fox Hub G2 gateway + AIO-H1 inverter). No FoxCloud, no account, no internet — it talks to the device's own http://<ip>/api/v1/sunspec/data endpoint and decodes the SunSpec/Modbus frames locally. · GitHub

Hopefully, this might help others in the community.