Hi,
I use Z-Wave JS on HAOS and having trouble adding the Fibaro door sensor.
Other Fibaro products were no problem, but this door sensor…
It seems from the logging the device did go into inclusion but Z-Wave in HA still seems to wait and basically no device is being added (that dialog seems very buggy).
Any tips anyone?
2025-12-15 21:00:25.578 DRIVER one or more queues busy
2025-12-15 21:00:25.581 DRIVER » [REQ] [AddNodeToNetwork]
action: Stop
high power: true
network wide: true
callback id: 112
2025-12-15 21:00:25.583 SERIAL » 0x0105004ac57005 (7 bytes)
2025-12-15 21:00:25.587 SERIAL « [ACK] (0x06)
2025-12-15 21:00:25.641 SERIAL « 0x0107004a70060000c4 (9 bytes)
2025-12-15 21:00:25.645 SERIAL » [ACK] (0x06)
2025-12-15 21:00:25.647 DRIVER « [REQ] [AddNodeToNetwork]
status: Done
callback id: 112
2025-12-15 21:00:25.650 CNTRLR The inclusion process was stopped