[ESP32-3C] Hello everyone, I’m having an issue after adding an ESP32-C3 Super Mini board using the ESPHome Builder. The board flashes without any issues and works, but for some reason, I cannot create more than one switch entity for it. Here is my YAML configuration: captive_portal: switch: …

My goto first in ESPHOME is to run Validate first, to check the rendered yaml file i correct. There are so more options that renders before the compile and install. There you can see if you missed a obvious one. [image]

Yes, I can see that. I received the message “INFO Configuration is valid!”

Yes, that confirms that, but if you look at the rendred yaml file, you will se that the ESPHOME add more options in your yaml file. So studdy this yaml and see if you get some hints whats going on.

Here is my entire YAML file (except for the password and key). I don’t see anything here that would prevent the second switch from displaying. esphome: name: esp32minfortestrel friendly_name: ESP32MinForTestREL esp32: variant: esp32c3 flash_size: 4MB framework: type: esp-idf logger:…

[image] FaceHoof: I don’t see anything here that would prevent the second switch from displaying. Neither do I. This is either bug or not esphome issue. What version are you on?

Core 2025.12.5 Supervisor 2026.07.5 Operating System 16.3 Frontend 20251203.3

[image] FaceHoof: Here is my entire YAML Sorry, my(yours) entire yaml file render to, with the “Validate” that’s also shows the ESPHOME Version, not the HA version. INFO ESPHome 2026.7.4 INFO Reading configuration /root/config/test.yaml... esphome: name: esp32minfortestrel friendly_name:…

Okay, here is my file in full. INFO ESPHome 2026.7.4 INFO Reading configuration /config/esphome/esp32minfortestrel.yaml... esphome: name: esp32minfortestrel friendly_name: ESP32MinForTestREL min_version: 2026.7.4 build_path: build/esp32minfortestrel platformio_options: {} build_flags: […

Did you notice this topic? [image] Homeassistant does not recognize all esphome entities ESPHome Hi i’m in trouble with esphome and homeassisant . i thought it was a DB problem but i clean all databases. of homeassistant. homeassistant 2025.12.5 detect my esp…

[image] FaceHoof: Core 2025.12.5 Supervisor 2026.07.5 Operating System 16.3 Frontend 20251203.3 Ancient history versions are not supported. Update all of those and try again (including your ESPHome version).

Home Assistant only showing one switch for ESP32-C3 device

ESPHome

Karosm (Karosm) August 15, 2026, 10:25am 10

Did you notice this topic?

Maybe .7.4 has some issues (I’m on older version)..