Integrating Lutron Aurora dimmers with Home Assistant can be a little tricky, but it makes them much more powerful. Table of Contents Setting up Zigbee with Home Assistant Conbee II ZHA Pairing Lutron Aurora dimmers with Home Assistant Zigbee Using Lutron Aurora dimmers with Home Assistant E…

I was trying to integrate IKEA 5 button remote which works kinda same. Got it pared which appears just as a power node. But I could not get it to fire any events. It seems like people were successful in getting it configured and there is an automation blueprint just to configure that. So it seems it…

That looks awesome, however, I’m using Deconz not ZHA, so i’ve managed to listen to deconz_event instead, but i don’t get any args[] on these events, whaat am i missing? Also, could you please provide more detail on how to set up the node-red flow? i’m a newb with node-red :frowning:

I’m having trouble connecting my Lutron Aurora Dimmers with ZHA and a conbee II. I’m able to pair it and can read the battery levels but I’m not able to read any zha events in the developer tools. Other devices seem to show up just fine. Anyone have any suggestions?

I only recently learned that not all zigbee devices’ events are visible by default when listening for zha_events. Try changing zha logging to debug mode by entering the following into your configuration.yaml: logger: default: error logs: homeassistant.components.zha: debug default: info …

This is awesome. Could you use the same setup to control Sonos (or other audio) volume?

I’m having trouble with the button presses (the dial works fine). The dimmer is about 2 inches from a Zigbee switch that is listed as a router in ZHA, but still only connects to the coordinator (HA Yellow). I’ve reset the dimmer many times, and when I try to join the dimmer through the switch instea…

Anyone have luck using the Sonoff Zigbee 3 Stick? I am not. I was able to pair the device but no events reported under the zha_event topic, in debug mode or not. Too bad, was excited to not have my whole system shut down when some well meaning soul turns off the light switch (that controls the only …

I am using the Sonoff Dongle-P with ZHA and I was able to get this paired with events reported under zha_event but only after adding it via a Philips Hue bulb and changing the logging to debug.

I’m suffering from this issue as well, were you able to resolve it? I have a centralite(Smartthings Gen1) outlet just 3 feet away.

I’ve removed my pairing from ZHA and am now using the device through the hue hub. The Hue Hub exposes much more useful information in its events than zha does. The most notable improvement is that from the hue hub you get the amount of motion in a turn, making it possible to do magnitude-based adjus…

How to Integrate Lutron Aurora Dimmers With Home Assistant

Share your Projects!

GollyJer (Jeremy Gollehon) January 24, 2026, 5:59am 66

I got these working very well using pyscript.