Nut stop working after update 0.21 in raspberry

Configuration
1

Hi guys, I’m running Home assistant with HassOS using a raspberry3b+ . I’m using Nut for monitoring my UPS but after the last update it stop working.
This is the log:

Error relocating /usr/sbin/upsdrvctl: __select_time64: symbol not found
Error relocating /usr/sbin/upsdrvctl: __difftime64: symbol not found
Error relocating /usr/sbin/upsdrvctl: __gettimeofday_time64: symbol not found
Error relocating /usr/sbin/upsdrvctl: __stat_time64: symbol not found
[cont-init.d] nut.sh: exited 127.
[cont-finish.d] executing container finish scripts…
[cont-finish.d] 99-message.sh: executing…

            Oops! Something went wrong.

We are so sorry, but something went terribly wrong when
starting or running this add-on.

Be sure to check the log above, line by line, for hints.

[cont-finish.d] 99-message.sh: exited 0.
[cont-finish.d] done.
*

It’s possible to rollback to version 0.20 ?

Thanks,
Emanuele.

2

Hi,

same problem here :

image
image906×560 41.6 KB

1 Like
3

I have exactly the same problem. Current version: 0.2.1

4

I have same problem, i tried every things but nothing

Screen 2020-08-29 alle 10.54.02
Screen 2020-08-29 alle 10.54.02711×1148 195 KB

5

Same here:

Error relocating /usr/sbin/upsdrvctl: __select_time64: symbol not found
Error relocating /usr/sbin/upsdrvctl: __difftime64: symbol not found
Error relocating /usr/sbin/upsdrvctl: __gettimeofday_time64: symbol not found
Error relocating /usr/sbin/upsdrvctl: __stat_time64: symbol not found
[cont-init.d] nut.sh: exited 127.
[cont-finish.d] executing container finish scripts...
[cont-finish.d] 99-message.sh: executing... 
-----------------------------------------------------------
                Oops! Something went wrong.

 We are so sorry, but something went terribly wrong when
 starting or running this add-on.
 
 Be sure to check the log above, line by line, for hints.
-----------------------------------------------------------
[cont-finish.d] 99-message.sh: exited 0.
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
6

A new Network UPS Tools update is available and fix the issue! :ok_hand:

1 Like
7

Add-on version: 0.3.1
You are running the latest version of this add-on.
System: HassOS 4.12 (armv7 / raspberrypi3)
Home Assistant Core: 0.114.4
Home Assistant Supervisor: 235

Please, share the above information when looking for help
or support in, e.g., GitHub, forums or the Discord chat.

[cont-init.d] 00-banner.sh: exited 0.
[cont-init.d] 01-log-level.sh: executing…
[cont-init.d] 01-log-level.sh: exited 0.
[cont-init.d] nut.sh: executing…
[07:53:17] INFO: Setting mode to netserver…
[07:53:18] INFO: Generating /etc/nut/upsd.users…
[07:53:19] INFO: Configuring user:
[07:53:20] INFO: Password is NOT in the Have I Been Pwned database! Nice!
[07:53:22] INFO: Configuring Device named tecnoware…
[07:53:23] INFO: Starting the UPS drivers…
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4)
Supported UPS detected with megatec/old protocol
Rating information unavailable
Startup timer elapsed, continuing…
[cont-init.d] nut.sh: exited 1.
[cont-finish.d] executing container finish scripts…
[cont-finish.d] 99-message.sh: executing…

            Oops! Something went wrong.

We are so sorry, but something went terribly wrong when
starting or running this add-on.

Be sure to check the log above, line by line, for hints.

[cont-finish.d] 99-message.sh: exited 0.
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.