Why should smart switches look like white plastic? And why do designer switches so often lack smart functionality?
We created Repenic to challenge both assumptions.
Our Zigbee Smart Toggle Switch combines the familiar tactile movement and audible “click” of a traditional mechanical switch with modern smart-home control. It is a smart on/off switch, and can be paired with compatible Zigbee smart bulbs for physical wall-based control while keeping the bulbs powered.
Designed for both homes and professional projects, the switch requires a neutral connection and supports stable, flicker-free control of compatible lighting loads, including non-dimmable lights.
Key specifications
Zigbee 3.0 connectivity
230 V, 50 Hz
Up to 350 W for lighting loads
Up to 5 A for suitable appliances, such as extractor fans
1-, 2-, 3- and 4-gang configurations
Support for conventional 2-way and intermediate switching
Energy monitoring through the Repenic app
Over-current and over-temperature protection
Zigbee OTA firmware updates
Compatible with standard UK 25 mm back boxes
The Toggle Switch can be combined with Repenic Smart Dimmer modules on the same multi-gang faceplate. A matching Smart Rocker Switch is also available, offering the same core Zigbee functionality in a different mechanical form. The Rocker Switch cannot be combined with dimmer modules on the same faceplate.
With screwless metal faceplates in stainless steel and brushed solid brass, Repenic is designed to be part of the interior—not an afterthought.
If anyone in the Home Assistant community is interested in testing the switches, exploring Zigbee compatibility or sharing feedback, please leave a comment below or contact us at:
Your switches look sleek but at €95 for a UK double socket + USB & €106 for a 2 gang switch you’re way out of most people’s budget. People tore into Aqara for offering a similar UK double socket + USB for €70, and that had zigbee+matter support. I’d love to try your products, but at that price it better come with at least €50 inside the box.
PS - you might wanna go over your site & give ChatGPT a scolding.
The FAQ says it’s compatible with ZHA, but it seems your dimmer PR is still open since June & hasn’t been merged in yet. Didn’t manage to find a PR for your switches, so not sure of the situation there, but even Z2M only knows about your dimmer model.
No, I think it’s trying to show that there is a hole in the roof because the drain vent stack is too short and you don’t want sewer gas building up in the attic.
Thank you for the welcome and for taking the time to share such detailed feedback. We genuinely appreciate the candid comments.
Thanks for pointing this out. To clarify, the dimmer’s advanced features are currently available in Home Assistant through Zigbee2MQTT.
We have also submitted the required support for ZHA upstream, but the PR is still awaiting review and merge by the ZHA maintainers. Therefore, ZHA support is not yet officially included in the standard ZHA release.
This does not affect the functionality of the device when used with Zigbee2MQTT. We will update our compatibility information and share an update once the ZHA PR has been merged. Thank you for your feedback.
On the Home Assistant logo:Thank you for pointing it out. We have now updated the graphic with the correct official Home Assistant logo.
If you would be interested in testing the product yourself, please feel free to contact me directly. We would be very happy to send you a smart dimmer for independent testing, and we would genuinely value any feedback, suggestions, or criticism you may have.
Thanks again for helping us improve both our product information and our website.
ohWell can’t be that many, most of there Devices “are for some reason” labeled as “sold out” , Maybe they are Handcrafted by a one-handed retired engineer
But they did fixed the one ShadowFist was looking at thou
I guess it’s being used as a placeholder because they haven’t launched yet, and maybe don’t want people trying to buy the products until they do. Pure speculation on my part.
Being UK based I was intrigued by these, but I’d need to start saving up.
Yes, it’s a clean, nice and cool Design, i like a few of them , Thou the sockets wont work here, and i wonder if it’s the same “placeholder” in the walls here in Scandinavia
Yes, that’s right, we’re currently preparing for launch, and the products will officially go on sale on 19 August. That’s why they’re currently listed as “Sold Out”/“Coming Soon.”
We really appreciate your interest in our new products. If you’re interested, once our stock arrives, we’d be happy to send you one of the products you’d like to try.
You’re right that the sockets are designed for UK-standard electrical systems and wall back boxes, so they may not be a direct fit for installations in Scandinavia. We’re looking into options for other regions in the future.
It wont be an “issue” in dept as we have about 45-50mm , hole is round about 60mm, and looking at your Dimmer-switch “detached-details” it seems to be just a matter of the “plastic” ring.
sure it could be a “square” ( but without the Tap near the corners )
We also have “normally” standard with 60mm between the 2 “inner” screw holes, the rest of the spec i think(not sure) follows the “requirements” here ( Beside the Sockets )
Thanks for sharing these detailed measurements and suggestions, they’re really helpful. If you’re interested in trying the product or discussing compatibility further, please contact our product support team at [email protected] . They can also provide you with a discount code.
Maybe they are Handcrafted by a one-handed retired engineer
