Sonoff D1 Random Power On

Hardware
22

The link works for me.

But it says:

use_rm433_remote (Optional, boolean): Set to True if your setup uses Sonoff RM433 or any other radio remote control. Properly setting this parameter allows the platform to identify what to do with incoming UART commands. RF chip is known to catch random commands if not paired with a real remote (so called ghost commands). This problem is observed even with the stock firmware and most probably is a bug in the MCU firmware or in the RF chip firmware. Setting this to False instructs the platform to properly ignore such commands and thus prevent unexpected switches or light intensity changes.

23

Hm…link works for me, too. But you can find that article by searching “esphome sonoff D1”. Google’s first hit will bring you to it. It’s ESPHome’s official web page.

24

Really? I’m saying about this one: https://jeffresc.dev/blog/2020-10-10/
Thanks.

25

You don’t need to do that method anymore.
Just flash it with ESP-Home and add:

use_rm433_remote: false

in the yaml.

1 Like
26

Indeed…now link doesn’t work anymore (maybe it was in my browser’s cache)
But, as said,it’s obsolete, just add above statement (but it’s HERE, hopefully)

27

Trying to figure out which one you mean. Could you maybe pinpoint it on the picture?
I think the black arrow?

Screenshot 2022-12-23 at 14.17.03
Screenshot 2022-12-23 at 14.17.03864×492 55.3 KB

28

Yes, that’s the one. You can double-check it with continuity tester (beeper).