Swann DVR cameras help

Hardware
1

I have 8 cameras coax type conected back to a swann dvr that has a IP adress and is reachable at below address

http://10.0.0.36:85/index.html?_1515722090970

and shows login data Ive had to run explorer in compatibility mode to get the page to show as all other browsers dont seem to show up

image
image3600×1080 299 KB

I have tryed below config in camera.yaml
- name: IPDVR
platform: mjpeg
mjpeg_url: http://10.0.0.36/video1.mjpg
username: admindiligaf
password: Fakepass
port: 85
no errors just says image not available

this is what it looks like when logged into web page

image
image3600×1080 1.04 MB

2

any ideas on how to make these cameras show in HASS Thanks

3

You cannot show camera web interface. You must define camera video stream url in yaml file

Many NVR have ability to retransmit video feed.
I believe the retransmitted feed may be accessible in HA but not sure how that may affect NVR performance

Also. If that is real user/pass I suggest you remove immediately

4

Ok what about using the
browser: module not sure how it’s configured but maybe somethings like

Browser:
URL: my cameraaddress.com
Also yes fake user password above and local IP
I’ll change it anyhow to please

5

What model Swann you using?

6

Hi there it’s a DVR8-4575
With Swann thermal sensor cameras

7

can you add swann dvr in with home assistant