Trouble with Everything presence lite

I am having no luck with my EPL’s occupancy will show clear zone 1 will show occupied (If I am in zone 1 should occupancy not show detected. Target one will show off but will show distance to targets. If it see’s a target shouldn’t target one show on? I walk into the room after being out for 15 min and am 2’ in front of it and both occupancy and zone one show clear?
If I reboot it it will detect me for a day but still the problem other issues remain also rebooting it every day is not a practical solution

Firmware: 2024.7.3 (Aug 11 2024, 21:28:24)
Hardware: 1.0.8



not sure what I am doing wrong but would appreciate any help getting these working.

Craig

Did you find a solution for this? I am having the same issues here too

My Zones are correctly configured, so no idea why I cant get Occupancy per zone:

I flashed the non Bluetooth firmware and it seems much better. I have not set upmy zones up again so not sure how it will work.

Yup, am on that firmware too. Still dont get logical results from my zones - for some reason, zone1 and 2 seem to aggregate to zone 3 now.
I will write specific workarounds in node red for this.

Still haven’t re-sent up my zones, I may try to get back to it this week.

Which week? (friendly reminder :slight_smile: )