Two lights 1 gang two way and 2 gagn two way

Hardware
1

so i have 2 lights in one room, switch A controls just one light A, switch B controls light A and Light B. i already other sonoff switches (wifi and zigbee) and now i left with this room. the current switches are rocker switches
im happy to change everything but categorically not run any new wires. i just need a bit of guidance on what products i need, i know im looking at ZBMINIL2 and either the wifi or zigbee light switches but with my knowledge i dont think i can use the two gang switch in because both L1 and L2 are for live.

any help is appreciated

2

You could go for the sonoff basic r4/v5 for both if you don’t mind installing relay on the light fixture

3

There are a multitude of relay or dimmer devices, WiFi, Zigbee, Z-Wave, Insteon.

Connect power to the base of both lights. Wire the aforementioned device between the base and the light itself. This gives you individual control each light. At your wall switch, you could have a two button device. Each button could be “paired” with a light.

In a controller, like HA, you can make them flash three times or any other kind of a dance.

1 Like