Worx Landroid Package (Deprecated)

tlm4594 · July 18, 2022, 2:26pm

Hello I have a landroid w147. I have successfully installed landroid cloud and want to set my landroid in party mode when I’m gone. I setup the call service and I keep getting this error when the automation triggers “(Nancy, Service Call) The called service, partymode, is not supported by this device!
(Nancy, Service Call) Supported services for this device: [‘lock’, ‘setzone’, ‘refresh’, ‘restart’, ‘config’]” . My w147 supports party mode within the landroid app itself. Any ideas?

Barmalej · July 18, 2022, 2:34pm

Publish it here. Thanks

Barmalej · July 18, 2022, 2:50pm

I opened issue here

tlm4594 · July 18, 2022, 5:57pm

Awesome thank you!

Barmalej · July 18, 2022, 11:27pm

From here

    0: STATE_IDLE,
    1: STATE_DOCKED,
    2: STATE_STARTING,
    3: STATE_STARTING,
    4: STATE_RETURNING,
    5: STATE_RETURNING,
    6: STATE_RETURNING,
    7: STATE_MOWING,
    8: STATE_ERROR,
    9: STATE_ERROR,
    10: STATE_ERROR,
    11: STATE_ERROR,
    12: STATE_MOWING,
    30: STATE_RETURNING,
    31: STATE_ZONING,
    32: STATE_EDGECUT,
    33: STATE_STARTING,
    34: STATE_PAUSED,

Sofa_Surfer · July 19, 2022, 12:15pm

Thx mate

{
  "status": {
    "auto": "Pulizia automatica",
    "charging": "In carica",
    "cleaning": "Pulizia",
    "docked": "In base",
    "edge": "Pulizia bordo",
    "error": "Errore",
    "idle": "Fermo",
    "mopping": "Lavaggio",
    "offline": "Disconnesso",
    "paused": "Pausa",
    "returning": "Ritorno in base",
    "returning home": "Ritorno in base",
    "segment cleaning": "Pulizia settore",
    "single_room": "Pulizia stanza",
    "spot": "Pulizia angoli",
    "stop": "Fermato",
    "unknown": "Sconosciuto",
    "edgecut": "Taglio bordi",
    "initializing": "Inizializzazione",
    "mowing": "Taglio",
    "rain_delay": "Ritardo pioggia",
    "starting": "Avvio",
    "zoning": "Ricerca zona"
  },
  "attr": {
    "current": "Attuale",
    "description": "Descrizione",
    "id": "ID",
    "reset_at": "Reset",
    "reset_time": "Tempo di reset",
    "accessories": "Accessori",
    "battery_level": "Livello batteria",
    "battery": "Batteria",
    "cycles": "Cicli",
    "total": "Totale",
    "temperature": "Temperatura",
    "temperature_measurement": "°",
    "voltage": "Tensione",
    "voltage_measurement": "V",
    "percent": "Percento",
    "percent_measurement": "%",
    "charging": "In carica",
    "charging_value_true": "si",
    "charging_value_false": "no",
    "partymode_enabled": "Modo festa",
    "lock": "Blocco",
    "blades": "Lame",
    "total_on": "Totale on",
    "current_on": "Corrente on",
    "error": "Errore",
    "firmware": "Firmware",
    "auto_upgrade": "Auto upgrade",
    "version": "Versione",
    "locked": "Bloccato",
    "mac_address": "MAC Address",
    "model": "Modello",
    "online": "Online",
    "orientation": "Orientamento",
    "pitch": "Beccheggio",
    "roll": "Rollio",
    "yaw": "Imbardata",
    "rain_sensor": "Sensore pioggia",
    "delay": "Ritardo",
    "triggered": "Attivo",
    "remaining": "Rimanente",
    "schedule": "Programma",
    "time_extension": "Estensione tempo",
    "active": "Attivo",
    "auto_schedule": "Programma auto",
    "settings": "Parametri",
    "enabled": "Attivato",
    "primary": "Primario",
    "secondary": "Secondario",
    "start": "Avvio",
    "end": "Fine",
    "duration": "Tempo",
    "boundary": "Confine",
    "monday": "Lunedì",
    "tuesday": "Martedì",
    "wednesday": "Mercoledì",
    "thursday": "Giovedì",
    "friday": "Venerdì",
    "saturday": "Sabato",
    "sunday": "Domenica",
    "serial_number": "Numero di Serie",
    "status_info": "Info stato",
    "time_zone": "Fuso orario",
    "zone": "Zona",
    "index": "Indice",
    "indicies": "Indici",
    "starting_point": "Punto di partenza",
    "capabilities": "Capacità",
    "One-Time-Schedule": "Programma unico",
    "Party Mode": "Modo festa",
    "Motor Torque": "Coppia motore ",
    "mqtt_connected": "MQTT Connesso",
    "supported_landroid_features": "Funzioni Landroid supportate",
    "party_mode_enabled": "Modo festa attivato",
    "rssi": "Qualità WiFi",
    "statistics": "Statistiche",
    "worktime_blades_on": "Tempo di lavoro con le lame",
    "distance": "Distanza",
    "worktime_total": "Tempo di lavoro totale",
    "torque": "Coppia",
    "state_updated_at": "ultimo aggiornamento a",
    "device_class": "Classe dispositivo",
    "friendly_name": "Friendly name",
    "supported_features": "Funzioni supportate"
  },
  "source": {
    "gentle": "Delicato",
    "silent": "Silenzioso",
    "standard": "Standard",
    "medium": "Medio",
    "turbo": "Turbo",
    "normal": "Normale",
    "high": "Alto",
    "strong": "Forte",
    "quiet": "Silenzioso",
    "max": "Max",
    "max+": "Max+"
  },
  "common": {
    "name": "Landroid Card",
    "description": "Landroid card vi permette di controllare il vostro robot tagliaerba.",
    "start": "Avvio",
    "continue": "Continua",
    "pause": "Pausa",
    "stop": "Stop",
    "return_to_base": "ritorno in base",
    "locate": "Localizza",
    "not_available": "Non disponibile",
    "edgecut": "Taglio bordi"
  },
  "error": {
    "missing_entity": "Entità mancante!"
  },
  "warning": {
		"actions_array": "ATTENZIONE: 'azioni' è riservato alla modifica delle azioni predefinite per i pulsanti esistenti. Se vuoi aggiungere azioni, usa invece l'opzione "scorciatoie"."
	  },
  "editor": {
    "entity": "Entità (Richiesto)",
    "camera": "Camera (Opzionale)",
    "image": "Immagine (Opzionale)",
    "compact_view": "Vista compatta",
    "compact_view_aria_label_on": "Attiva vista compatta",
    "compact_view_aria_label_off": "Disattiva vista compatta",
    "show_name": "Mostra nome",
    "show_name_aria_label_on": "Attiva mostra nome",
    "show_name_aria_label_off": "Disatttiva mostra nome",
    "show_status": "Mostra stato",
    "show_status_aria_label_on": "Attiva mostra stato",
    "show_status_aria_label_off": "Disattiva mostra stato",
    "show_toolbar": "Mostra toolbar",
    "show_toolbar_aria_label_on": "Attiva mostra toolbar",
    "show_toolbar_aria_label_off": "Disaattiva mostra toolbar",
    "code_only_note": "Nota: rendere disponibili le opzioni di azioni e statistiche solo tramite l'editor di codice."
  },
  "units": {
    "days": "giorni",
    "hours": "ore",
    "minutes": "minuti",
    "d": "j.",
    "h": "h.",
    "min": "min."
  }
}

Barmalej · July 19, 2022, 11:44pm

0.1.5 released

Version 0.1.5

Added

Added stats (Click on graph icon)
Added Current zone to status
Added Rain delay remaining to status
Added Eror description to status
Added compatibility with Landroid Cloud < 2.1. Closes #7
Added new element configBar
[Translate] Added danish translation by @projectraam #8
[Translate] Added italian translation by Sofa_Surfer
[Translate] Added translations of errors
[Translate] Added yes and no for boolean values
[README.MD] Added Worx Landroid L1000 WR147E to supported mode by @elvis7 #6
[README.MD] Added link to Home Assistant templating

Changes

Change option map to camera
[Translate] Fr. Moved action to action section

Fixes

Fix #7 Battery not showing if Landroid Cloud integration < 2.1.

Known Issues

Changing zone doesn’t work

dumber · July 20, 2022, 12:48pm

Thank you!

ilgio · July 20, 2022, 12:49pm

update at 1.5 clear cache but the card is blank

tvds · July 20, 2022, 12:54pm

There is already an issue created:

github.com/Barma-lej/landroid-card

v0.1.5 doesn't show anything

opened 06:02AM - 20 Jul 22 UTC

mdkeil

bug in progress

## **Before submitting a bug** [X] I updated to the latest version available … [X] I cleared the cache of my browser [X] I restarted hass more than 1time after the upgrade ## **Describe the bug** After upgrading from v0.1.4 to v0.1.5 the panel shows nothing. I tryed to deactivate "names", "status" or "toolbar" without any effect. [X] no errors in the debug log solution: Downgrading back to v0.1.4 ## **Versions:** - Release: [v0.1.5] - Browser: [HASS Android App 2022.6.0] - HomeAssistant version: [2022.7.4] @ Docker - HACS [1.26.2] - Landroid Cloud: [v2.2.2]

Same for me btw

Barmalej · July 20, 2022, 1:40pm

Version 0.1.6

Fixes

Try to fix #10

ilgio · July 20, 2022, 2:32pm

what code lovelance to view new features?
my card is before equal

Barmalej · July 20, 2022, 2:40pm

you have to clean cache

ilgio · July 20, 2022, 3:28pm

I cleaned cache…
now blank

Barmalej · July 20, 2022, 4:31pm

Version 0.1.7

Fixes

Added default locales to try to fix #10

Barmalej · July 20, 2022, 4:32pm

Install with HACS method to avoid clean cache and other issues

Kejszijo · July 22, 2022, 12:46pm

Hi,

How can I override the start action object? I want to start my own script.
Is that correct?

actions:
  start:
    - service: script.turn_on
      service_data:
        entity_id: script.mower_start_mow

And how can I override edgecut?

actions object

You can defined service invocations to override default actions behavior. Available actions to override are start, pause, resume, stop and return_to_base.
Thanks!

Barmalej · July 22, 2022, 5:57pm

actions:
  pause:
    service: fan.toggle
    service_data:
      entity_id: fan.toggle
  start:
    service: script.mower_start_mow
  edgecut:
    service: landroid_cloud.setzone
    service_data:
      entity_id: vacuum.mower
      zone: '1'

Your is:

actions:
  start:
    service: script.mower_start_mow

Now i made changes in README

Kejszijo · July 22, 2022, 8:59pm

Thanks! It works fine!
I have to open the house before I start mowing.

tlm4594 · July 22, 2022, 10:25pm

THATS IMPRESSIVE!!! So cool!

Worx Landroid Package (Deprecated)

Version 0.1.5

Added

Changes

Fixes

Known Issues

Version 0.1.6

Fixes

Version 0.1.7

Fixes

actions object

`actions` object