Dear HASS users,
Just started with a fresh config of Home Assistant Core 0.107.1
Lookslike devices are correct detected by OpenZwave (Version 1.4.3467).
2020-03-19 21:02:44.401 Detail, Node013, QueryStage_Dynamic
2020-03-19 21:02:44.401 Detail, Node013, Queuing (Send) SwitchBinaryCmd_Get (Node=13): 0x01, 0x09, 0x00, 0x13, 0x0d, 0x02, 0x25, 0x02, 0x25, 0xdc, 0x34
2020-03-19 21:02:44.401 Detail, Node013, Queuing (Send) SwitchMultilevelCmd_Get (Node=13): 0x01, 0x09, 0x00, 0x13, 0x0d, 0x02, 0x26, 0x02, 0x25, 0xdd, 0x36
2020-03-19 21:02:44.401 Detail, Node013, Queuing (Send) MeterCmd_Get (Node=13): 0x01, 0x0a, 0x00, 0x13, 0x0d, 0x03, 0x32, 0x01, 0x00, 0x25, 0xde, 0x20
2020-03-19 21:02:44.401 Detail, Node013, Queuing (Send) MeterCmd_Get (Node=13): 0x01, 0x0a, 0x00, 0x13, 0x0d, 0x03, 0x32, 0x01, 0x10, 0x25, 0xdf, 0x31
2020-03-19 21:02:44.401 Detail, Node013, Queuing (Query) Query Stage Complete (Dynamic)
In Hass, almost all modules are mapped with limited entities; e.g. No binary command, or dim level:
Any ideas to move forward ?