ZWA-2 in docker compose

robfish · September 8, 2025, 9:32am

I have HA running in docker compose and have just added to my
docker-compose.yml the code for the “zwave-js-ui” service which does allow me to add the ZWA-2 device.
I have tried to pair with a couple of Shelly devices but I get:-
“This device has been provisioned but is not yet included in the network.”

I suspect that ZWA-2 is not compatible with docker compose.

Has anyone successfully integrated ZWA-2 into docker compose?

tmjpugh · September 8, 2025, 1:08pm

Yes. No different than any other usb device.

Did you add it to zwavejsui?

Care to share ?

robfish · September 9, 2025, 1:04am

I hadn’t done anything via the zwave js ui so when I did I set the region to New Zealand/Australia and now the Shelly Wave 1 seems ok in HA.
(It has AU/NZ on the packet)

So now I suspect that the problem with the Shelly Wave Motion EU sensors is that they are not the right region.

I am not sure that those sensors are available for my region.

IMTheNachoMan · January 15, 2026, 2:32am

Were you able to figure this out?

robfish · January 15, 2026, 8:39pm

I just searched for:-
“docker compose example for zwave-js-ui”
and found this:-

github.com/zwave-js/zwave-js-ui

docker/docker-compose.yml

65ed2e32f

version: '3.7'
services:
  zwave-js-ui:
    container_name: zwave-js-ui
    image: zwavejs/zwave-js-ui:latest
    restart: always
    tty: true
    stop_signal: SIGINT
    environment:
      - SESSION_SECRET=mysupersecretkey
      # Uncomment if you want logs time and dates to match your timezone instead of UTC
      # Available at https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
      #- TZ=America/New_York
    networks:
      - zwave
    devices:
      # Do not use /dev/ttyUSBX serial devices, as those mappings can change over time.
      # Instead, use the /dev/serial/by-id/X serial device for your Z-Wave stick.
      - '/dev/serial/by-id/insert_stick_reference_here:/dev/zwave'
    volumes:

This file has been truncated. show original

robfish · January 15, 2026, 8:45pm

Yes I have Z-wave working fine now that I have my region set to ANZ and I purchased ANZ devices.

There was quite an issue with the Shelly web pages being misleading but with my help the errors have been identified and corrected.

If purchasing new Z-wave devices it is imperative that you get the correct region.

(I have two Shelly Motion EU devices free to a good home)