88.0 complains about keys that are not supported , while they are?

Configuration
2

I have same problem.

3

Your indenting is wrong for the plex one… sometimes it throws errors in other places so try fixing that and see if it fixes it

4

no, its correct, its just a copy/paste error here in this thread
corrected it in original post

5

can you show your errors/warnings?

6

I’ve got simelar errors but no line where to find it… just this:

Your configuration contains extra keys that the platform does not support.
Please remove [icon]. 
Your configuration contains extra keys that the platform does not support.
Please remove [device].

I’ve searched my config but cant find it…

1 Like
7

Yes of course. Here is my log

2019-02-21 09:10:30 WARNING (MainThread) [homeassistant.loader] You are using a custom component for custom_updater which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you do experience issues with Home Assistant.
2019-02-21 09:10:38 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [icon]. (See /home/homeassistant/.homeassistant/configuration.yaml, line 59).
2019-02-21 09:10:38 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 29).
2019-02-21 09:10:38 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 35).
2019-02-21 09:10:38 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 41).
2019-02-21 09:10:38 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 47).
2019-02-21 09:10:38 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 64).
2019-02-21 09:10:38 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 88).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.loader] You are using a custom component for sensor.google_fit which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you do experience issues with Home Assistant.
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.loader] Integrations need to be in their own folder. Change sensor/google_fit.py to google_fit/sensor.py. This will stop working soon.
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 113).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 124).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 135).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 146).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 157).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 168).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 179).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 190).
2019-02-21 09:10:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [initial]. (See /home/homeassistant/.homeassistant/mqtt/sensor.yaml, line 201).
2019-02-21 09:10:42 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [name]. (See /home/homeassistant/.homeassistant/configuration.yaml, line 162).
2019-02-21 09:10:43 WARNING (MainThread) [homeassistant.loader] Integrations need to be in their own folder. Change sensor/google_fit.py to google_fit/sensor.py. This will stop working soon.
2019-02-21 09:10:46 ERROR (MainThread) [homeassistant.core] Error doing job: Task exception was never retrieved

8

A lot of those are due to MQTT invalid options. This version of HA rigidly enforces instead of ignoring errors…

One thing to check is look for stuff you have that isn’t working… With MQTT BTW, retain and optimistic I think are gone.

Other errors are custom_components and it tells you they need to be renamed and moved… Just tackle stuff one part at a time.

Missing devices and components are the things to look for.

Also some of the docs might be lagging so you can check the actual PR’s if they are in the release notes for clues.

9

Mine 3 errors are all correct though

10

I do not have components mqtt is just a folder so called. There are just ordinary sensors. Previously, there were mqtt sensors, because there was no smartthings integration. Now there are only Home Assistant sensors.

11

synology camera doesnt have framerate

12

indeed, one issue resolved
2 other ones are indeed bugs in HA it seems , something about the platform_schema

13

I don’t have any indiacations on WHERE the issues are, I have 42 of below lines as Warnings in Hass.io:

2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].
2019-02-21 09:46:41 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [system], [parameter], [object_id], [data].

14

same issue here. “your configuration contains extra keys that the platform does not support”
and the line indicated was for pushover.

  • name: pushover_travis

anyone else seeing this warning message?

15

Every time there is warning about a key that is missing but it is supposed to work, it is actually an existing bug that is surfacing. Report them and the can be fixed. When reporting, don’t just dump your logs in an issue and let us figure it out, because we won’t. Report on a per platform basis which keys are getting flagged.

Here is an example issue https://github.com/home-assistant/home-assistant/issues/21263

1 Like
16

Thx… I also opened an issue, but it’s closed now

Does it means they already did action?

Here , see below, or do I need to report again?

1 Like
17

Dark sky key update_interval: for sensor works, for platform, HA complains.

18

Write it up as an issue on github, that’s what @balloob is refering to when he says ‘report it’.

19

Version 0.88 contains a Breaking Change concerning update_interval. It has been replaced by scan_interval. I mentioned it in a post here and, for the convenience of others, listed some of the affected components. DarkSky is one of them (the DarkSky Sensor’s documentation shows an entry for the scan_interval option but not for update_interval).

1 Like
21

I have the same: - platform: samsungtv when using mac:

edit:
fixed https://github.com/home-assistant/home-assistant/issues/21263

22

I updated Home Assistant to version 88.0
I have the following WARNING:
2019-02-22 05:22:04 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.
Please remove [name]. (See /home/homeassistant/.homeassistant/configuration.yaml, line 161).

Line 161 - string “remote:”

Operating environment (Hass.io/Docker/Windows/etc.):
Home Assistant (Raspbian) Built using Python 3, Polymer

Component/platform:

remote:

  • platform: itach
    name: Living room
    host: 192.168.0.11
    devices:
    • name: TV
      connaddr: 3
      commands:
      • name: “ON”
        data: “0000 006D…”
      • name: “OFF”
        data: “0000 006D…”
    • name: TV sound
      connaddr: 3
      commands:
      • name: “Up”
        data: “0000 006D…”
      • name: “Down”
        data: “0000 006D …”