Hello,
how can you integrate an arduino library into ESPhome?
I would like to bind an ESP8266 so that it communicates with the FritzBox as a VOIP device.
Currently I have it running as an arduino program, but I would like to use an ESP 8266 for two tasks.
A relay for the bell on / off and at an input detection when someone rings the doorbell (display in HA and internal call with the FritzBox).
This is my current program code that I would like to implement in ESPhome, unfortunately I am a beginner and still have far too little experience.
#include <WiFiUdp.h>
#include <ArduinoSIP.h>
/* ====================================================================
Copyright (c) 2018 Juergen Liegner All rights reserved.
(https://www.mikrocontroller.net/topic/444994)
Copyright (c) 2019 Florian Wernze
(https://wernze-home.net/wordpress/hobbys/arduino-esp8266-tuerklingel/)
Copyright (c) 2019 Thorsten Godau (dl9sec)
(Did some optimizations, extensions and beautification of Florian's code
and integrated the library)
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
3. Neither the name of the author(s) nor the names of any contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR(S) OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
====================================================================*/
#include <ESP8266WiFi.h>
#include <ArduinoSIP.h>
//#define DEBUGLOG
#define LED_ESP12E 2
#define LED_NODEMCU 16
//------------------------------------------------
// Configuration with static IP
//------------------------------------------------
// WiFi parameters
const char* WiFiSSID = "RXXXXXXXXXXXX"; // WiFi SSID
const char* WiFiPSK = "GXXXXXXXXXXXX"; // WiFi WPA2 preshared key
const char *WiFiIP = "192.168.150.201"; // WiFi IP of the ESP
const char *WiFiGW = "192.168.150.10"; // WiFi GW .10
const char *WiFiNM = "255.255.255.0"; // WiFi NM
const char *WiFiDNS = "192.168.150.10"; // WiFi DNS .10
// Sip parameters
const char *SipIP = "192.168.50.1"; // IP-Adresse der Fritz!Box
const int SipPORT = 5060; // SIP port der FRITZ!Box
const char *SipUSER = "Tuerklingel"; // SIP-Call username FRITZ!Box
const char *SipPW = "gl########"; // SIP-Call password FRITZ!Box
// Dial parameters
const char *SipDIAL = "**711"; // Nummer die zu wählen ist **9 alle Telefone **711 interne Rufgruppe
const char *SipTEXT = "Glocke"; // Text der angezeigt wird (Eingang 2)
//------------------------------------------------
char acSipIn[2048];
char acSipOut[2048];
Sip aSip(acSipOut, sizeof(acSipOut));
void setup()
{
int i = 0;
IPAddress myIP;
IPAddress myGW;
IPAddress myNM;
IPAddress myDNS;
ESP.wdtDisable();
ESP.wdtEnable(WDTO_8S);
Serial.begin(115200);
Serial.setDebugOutput(false);
delay(10);
pinMode(LED_ESP12E, OUTPUT);
pinMode(LED_NODEMCU, OUTPUT);
pinMode(2, INPUT);
digitalWrite(LED_ESP12E, 1); // LED off
digitalWrite(LED_NODEMCU, 1); // LED off
Serial.printf("\r\n\r\nConnecting to %s\r\n", WiFiSSID);
WiFi.setAutoConnect (true);
WiFi.setAutoReconnect (true);
WiFi.softAPdisconnect (true);
myIP.fromString(WiFiIP);
myGW.fromString(WiFiGW);
myNM.fromString(WiFiNM);
myDNS.fromString(WiFiDNS);
WiFi.config(myIP, myGW, myNM, myDNS);
if ( String(WiFiSSID) != WiFi.SSID() )
{
Serial.print("Wifi initializing...\r\n");
WiFi.begin(WiFiSSID, WiFiPSK);
}
while ( WiFi.status() != WL_CONNECTED )
{
delay(500);
Serial.print(".");
}
WiFi.persistent(true);
Serial.printf("\r\nWiFi connected to: %s\r\n", WiFi.localIP().toString().c_str());
digitalWrite(LED_ESP12E, 0);
aSip.Init(SipIP, SipPORT, WiFiIP, SipPORT, SipUSER, SipPW, 15);
}
void loop(void)
{
// SIP processing
aSip.Processing(acSipIn, sizeof(acSipIn));
// Doorbell handling begin ===========================
if ( digitalRead(2) == LOW )
{
aSip.Dial(SipDIAL, SipTEXT);
}
// Doorbell handling end =============================
ESP.wdtFeed(); // Retrigger watchdog
}
Gerald
