thanks! yeah I am. I didn’t think it would let me save it, but it did, and it works…kind of. I get the alert now, but get an error instead of the picture about “HLS stream unavailable”. Not sure what that’s all about.
Edit:
I ended up upgrading from BI4 to BI5.
Now seems like everything is working as far as actually sending the image. I just need to do some tweaking on the HA side to get it how I want it.
Glad you got it working. Yes, BI5 adds a lot of new features!
I found that this setup works for me on my Android phone.
BI sends two MQTT messages on alert:
Topic: BlueIris/&CAM/alert
{ "id":"&ALERT_DB", "object":"&MEMO", "camera":"&CAM", "name":"&NAME" }
Topic: BlueIris/&CAM/alert-image
&ALERT_JPEG
This is how I’m sending the image, all of my cameras are named with a standard “camera.[BI short cam name]_alert:”, e.g. “camera.sidegate_alert”.
image: '/api/camera_proxy/camera.{{ trigger.payload_json.camera }}_alert
I get the picture whether on my home WiFi or away from home on cellular data (4G/5G). I do subscribe to Nabu Casa, which is how I think this works when off-net (?) as neither HA or BI is exposed to the Internet.
Here’s the full automation I use (based on @wjbeckett previous post), which in my case I only want to trigger between 1 hour after sunset and sunrise. I also use a specific notification channel “BlueIris” so that I can set a different notification sound for BI alerts on the HA Companion app (an annoying one that will wake me up if AI detects a person in the back yard late at night, for example):
- id: blueiris_notification
alias: Blue Iris Notification
description: ''
trigger:
- platform: mqtt
topic: BlueIris/+/alert
condition:
- condition: sun
after: sunset
after_offset: 01:00:00
before: sunrise
action:
- delay: 1
- service: notify.mobile_app_[DEVICE NAME]
data:
message: A {{ trigger.payload_json.object.split(":")[0].strip('%') }} was detected
on the {{ trigger.payload_json.name }} camera.
data:
channel: BlueIris
ttl: 0
priority: high
clickAction: http://[NVR IP]:81/ui3.htm?maximize=1&tab=alerts&cam={{
trigger.payload_json.camera }}&rec={{ trigger.payload_json.id }}
image: '/api/camera_proxy/camera.{{ trigger.payload_json.camera }}_alert'
actions:
- action: URI
title: Live View
uri: http://[NVR IP]:81/ui3.htm?maximize=1&cam={{ trigger.payload_json.camera
}}
- action: URI
title: View Clip
uri: http://[NVR IP]:81/ui3.htm?maximize=1&tab=alerts&cam={{ trigger.payload_json.camera
}}&rec={{ trigger.payload_json.id }}
mode: queued
Hope this helps.
Just sharing this automation in case others find it useful, I’ve got deepstack setup and a hotspot zone marking the path to my front door. This automation then checks if there’s a person in my drive and then sends a TTS message to my phone.
Usually this fires just before my doorbell automation which actually does send a camera snapshot to my phone with another TTS - I shared that somewhere earlier in the thread 
(no image notification in this one but if you want that you can copy-paste one of the example action sequences in this thread)
BI sends an entirely separate MQTT alert from the main camera image alert with the AI info.
BI Alert example:
MQTT Topic: BI/hotspot_info/camera1
Payload: { "alert_db": "&ALERT_DB", "alert_date": "&ALERT_TIME", "json": &JSON, "memo": "&MEMO", "type": "&TYPE" }
HASS Automation example:
alias: "[CameraAlert] Camera1"
description: ""
trigger:
- platform: mqtt
topic: BI/hotspot_info/camera1
condition:
- condition: state
entity_id: input_boolean.motionalert_front_drive
state: "on"
action:
- choose:
- conditions:
- condition: template
value_template: >-
{% set cam_data = 'json' in trigger.payload_json and trigger.payload_json.json %}
{% set ai_data = (cam_data and (cam_data|length)) and cam_data|first %}
{% if ai_data and 'found' in ai_data and 'success' in ai_data.found and ai_data.found.success and 'predictions' in ai_data.found %}
{% if "person" in (ai_data.found.predictions | map(attribute='label', default="empty") | list) %}
{{ true }}
{% else %}
{{ false }}
{% endif %}
{% else %}
{{ false }}
{% endif %}
sequence:
- choose:
- conditions:
- condition: template
value_template: >-
{% set memo_data = 'memo' in trigger.payload_json and trigger.payload_json.memo %}
{{ true if memo_data and 'person' in memo_data else false }}
sequence:
- repeat:
count: "1"
sequence:
- service: notify.mobile_app_phone1
data:
message: TTS
title: Someone's coming sir
data:
media_stream: alarm_stream_max
importance: max
tts_text: Someone's coming sir
- delay:
hours: 0
minutes: 0
seconds: 10
milliseconds: 0
default:
- repeat:
count: "1"
sequence:
- service: notify.mobile_app_phone1
data:
message: TTS
title: Someone might be coming sir
data:
media_stream: alarm_stream_max
importance: max
tts_text: Someone might be coming sir
- delay:
hours: 0
minutes: 0
seconds: 10
milliseconds: 0
mode: single
thanks!
yeah im doing something similar as @wjbeckett as well. Except I’m sending the image and a caption to telegram
service: telegram_bot.send_photo
data:
url: http://<bi_ip>:<bi_port>/alerts/{{ trigger.payload_json.id }}&fulljpeg
caption: >-
A {{ trigger.payload_json.object.split(":")[0].strip('%') }} was detected on
the {{ trigger.payload_json.name }} camera.
The other part im trying to figure out would be how to attach a 5 second clip. The old way I was alerting was straight from BI, and attaching 3 pictures and a video clip to an email. I would like to try to replicate that with homeassistant.
I ended up getting videos sending to telegram working for anyone else that might be interested.
TL;DR - On alert, send a video to an FTP server that HA has access to (could use HA FTP add-on), use HA folder_watcher add-on to watch when the file has been modified, then use telegram_bot to send the video.
BI supports sending a video file via FTP on alert. The bummer is BI doesn’t support SFTP (although they do support FTPS). I didn’t love the idea of sending the video over plain text FTP (and couldn’t get FTPS working with the BI FTP add-on), so I spun up an FTP server on the BI host, and configure BI to use that local FTP server. Then I network share the FTP directory (on the BI host), and mount that share on my HA host at /bialerts.
Folder Watcher Config
Then I configured HA folder_watcher add-on (configuration.yml) to watch that directory:
folder_watcher:
- folder: /bialerts
patterns:
- "*.mp4"
You will also need to add this to configuration.yml as well:
homeassistant:
allowlist_external_dirs:
- "/media"
Camera Alert Config
Then in BI i setup the alert like this:
Automation Config
Then I setup my automation like this:
- wait_for_trigger:
- platform: event
event_type: folder_watcher
event_data:
event_type: modified
path: /bialerts/{{ trigger.payload_json.camera }}.mp4
- platform: event
event_type: folder_watcher
event_data:
event_type: created
path: /bialerts/{{ trigger.payload_json.camera }}.mp4
timeout:
hours: 0
minutes: 1
seconds: 0
milliseconds: 0
- service: telegram_bot.send_video
data:
file: /bialerts/{{ trigger.payload_json.camera }}.mp4
This will watch for if an mp4 file is created or modified with the camera short name, with a timeout of 60 seconds, in my testing it takes my setup around 10 seconds to complete, but you might have to adjust this timeout as needed.
Thoughts
I dont have a lot of cameras, and dont get a lot of alerts, but so far correct video has been attached.
This could be simplified IF BI supported SFTP, OR if you dont care about sending video files over FTP, or setup FTPS server/got HA FTP addon working with FTPS, to be fair I didn’t spend much time on getting FTPS working.
I migrated my deepstack AI alert automation to a blueprint which is now here: BlueIris Deepstack AI Alert Confirmation
Feedback is welcome 
I tried to make it configurable for my needs and hopefully others too!
Just tried this with the latest HA and couldn’t get the mqtt camera to load the image until I realized 2 things:
mqtt:
camera:
- topic: BlueIris/gate/alert-image
name: Gate Alert
unique_id: camera.gate_alert
image_encoding: b64
Thanks for the update about needing image_encoding: b64 That must have changed since when I set this up, and I was just starting to investigate why my alert images stopped working.
I noticed that this changed when I upgraded to core 2022.12. I suddenly stopped getting images in my HA companion app alerts. I was using encoding: b64 and it was working fine under 2022.11.
Changed those to image_encoding: b64 and all was well again.
Thanks for pointing this out guys. I try to be diligent and read the release notes and breaking changes every single month but it’s easy to miss! Does seem mad to me how quickly hass deprecates and removes features but 🤷
@jbouwh thanks for this Christmas present
Hi there,
Thank you for sharing this.
The notification with the blue iris link worked perfectly for me, but I didn’t receive the image preview. My automotion is giving me the following error:
Stopped because an error was encountered at December 29, 2022 at 12:30:52 PM (runtime: 1.02 seconds)
Error rendering data template: UndefinedError: ‘dict object’ has no attribute ‘payload_json’
In this topic I can see that other people also got this error and it has something to do with backquotes, but I don’t understand what I did wrong.
this is how i set my blue iris topics config:
BlueIris/&CAM/alert
{ “id”:"&ALERT_DB", “object”:"&MEMO", “camera”:"&CAM", “name”:"&NAME" }
BlueIris/&CAM/alert-image
&ALERT_JPEG
@royle Use MQTT Explorer to inspect each alert event and check if the data is valid JSON.
Valid JSON should look like what’s in screenshot below. I suspect there is something in one of your variables that is breaking the JSON.
For example, don’t use &ALERT_JPEG temporarily to see if your ‘dict object’ error goes away.
You’re using the wrong quote mark
Your quotes: “”
Correct quotes: ""
If you look closely you’ll see yours are slanted, courtesy of Bill Gates … Never use those slanted ones anywhere
To disable them permanently:
https://support.microsoft.com/en-us/office/smart-quotes-in-word-702fc92e-b723-4e3d-b2cc-71dedaf2f343
Apparently they’re called “smart quotes”. Not sure what makes them smart though.
Also worth noting that this forum for some stupid reason auto converts quote marks to smart quotes unless you put them in code blocks. @wjbeckett could you edit your post? I think a few people are copying and pasting it and your example is not wrapped in a code block
Thank you for your response,
After following the link, I think I fixed it, but when I paste it here, it gets the wrong quotes again.
The image is still missing.
I tried the MQTT explorer and it appears that everything is working correctly
Could you please give me some suggestions based on the screenshot below?
Looks better there I think, share your mqtt camera config in home assistant now
Use ` on this forum either side of code to stop it changing the quote marks
Thank you so much for helping me with this,
I’m going crazy!
Here is how the camera is configured, i am using BI short name:
mqtt:
camera:
- topic: BlueIris/Gate-cam/alert-image
name: Gate-cam_alert
unique_id: camera.Gate-cam_alert
image_encoding: b64
- topic: BlueIris/Backyardcam2/alert-image
name: Backyardcam2_Alert
unique_id: camera.Backyardcam2_alert
image_encoding: b64
- topic: BlueIris/Backyard_cam/alert-image
name: Backyard_cam_Alert
unique_id: camera.Backyard_cam_alert
image_encoding: b64
Can you show the blue iris config for alert-image now? It’s weird that it says “no record” before the base64 data, that might be the problem…
Are there no errors showing up in home assistant?
This is the only similar case I can find and unfortunately he has no replies: https://blueirissoftware.com/forum/viewtopic.php?t=2392
My guess is that maybe it adds NO RECORD on the front if recording is disabled?
Or maybe it’s a problem with the database? Could try rebuilding
It’s definitely a problem in blue iris, I’d suggest watching the mqtt explorer and changing settings until you stop seeing NO RECORD at the front of the base64 data
Despite my efforts, I still receive “NO RECORD”.
Is it possible that my Blue Iris is an old version 5.5.0.15 that is causing the problem?
