Hello Ecronika,
Thanks for contributing to the community with a new Blueprint.
I have a suggestion for you. Many people who are not familiar with directory structures will have problems installing this without the Home Assistant MY tools.
Adding a MY link for this Blueprint to your top post would help them a lot.
Here is the link to make that.
Create a link – My Home Assistant
Note: if the original is in the forums here, it has to be in the top post in the topic and has to be the only code block there or the link will not work.
@Ecronika if you change this from a code block to just text this should do the mylink thing. There can be only 1 code block in the top post if you are sharing from there for the mylink to work.
Virtual MRT v0.1.10
T_in=21.0°C, T_out_eff=2.4°C [eff(min(temp=sensor,app=sensor))],
Wind_eff(km/h)=28.8 via sensor, Wind_ms=8.0,
Clouds=100% [sensor], UV=0.0 [weather_attr],
rain_mul=0.76 [sensor], day_fac=0.12,
rad≈52 W/m² [heuristic], loss_term=3.42, solar_term=0.08,
MRT_calc=17.7°C, MRT_out=18.0°C, T_op=19.5°C
Change that block to lead with a > like this…
Then post the blueprint back into the top post as a </> code block.
Sharing from any post but the top post will not work.