Boot seems successful, resetting boot loop counter

ESPHome
1

Ho installato a casa 3 wt32-eth01. 2 divquesti non danno nessun tipo di problema mentre uno di questi mi da molto spesso ik seguente messaggio:

[I][ota:113]: Boot seems successful, resetting boot loop counter.
[19:27:55][D][esp32.preferences:114]: Saving 1 preferences to flash…
[19:27:55][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed

La cosa brutta è che quando succede si spengono le luci collegate al wt32-eth01.

Da cosa può dipendere?

Di seguito il codice:
‘’ ’
substitutions:
name: “esphome-ingresso”
esphome:
name: ${name}
name_add_mac_suffix: false
platform: ESP32
board: esp-wrover-kit
on_boot:
then:
#- light.turn_off: luce_sgabuzzino_camera
#- light.turn_off: luce_camera
#- light.turn_off: luce_ingresso_camera
ota:

logger:

api:

web_server:

ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO0_IN
phy_addr: 1
power_pin: GPIO16
use_address: ${name}.local
manual_ip:
static_ip: 192.168.1.28
gateway: 192.168.1.1
subnet: 255.255.255.0

##################
###INTERRUTTORI###
##################

PULSANTE MENSOLA BAGNO

binary_sensor:

  • platform: gpio
    filters:

    • invert:
      pin:
      number: 32
      #mode:

    input: true

    pullup: true

    name: “Pulsante Mensola Bagno”
    on_click:

    • min_length: 100ms
      max_length: 1s
      then:
      • light.toggle: luce_mensola_bagno

PULSANTE MENSOLA INGRESSO

  • platform: gpio
    filters:
    • invert:
      pin:
      number: 33
      #mode:

    input: true

    pullup: true

    name: “Pulsante Mensola Ingresso”
    on_click:
    • min_length: 100ms
      max_length: 1s
      then:
      • light.toggle: luce_mensola_ingresso

PULSANTE LED CUCINA

  • platform: gpio
    filters:
    • invert:
      pin:
      number: 35
      #mode:

    input: true

    pullup: true

    name: “Pulsante Led Cucina”
    on_click:
    • min_length: 100ms
      max_length: 1s
      then:
      • light.toggle: luce_led_cucina

PULSANTE BAGNO

  • platform: gpio
    filters:
    • invert:
      pin:
      number: 36
      #mode:

    input: true

    pullup: true

    name: “Pulsante Bagno”
    on_state:
    then:
    - light.toggle: luce_bagno

PULSANTE CUCINA

  • platform: gpio
    filters:
    • invert:
      pin:
      number: 39
      #mode:

    input: true

    pullup: true

    name: “Pulsante Cucina”
    on_click:
    • min_length: 100ms
      max_length: 1s
      then:
      • light.toggle: luce_cucina
        ##################

USCITE

##################

light:

LUCI BAGNO

  • platform: binary
    id: luce_bagno
    name: “Luci Bagno”
    output: luci_bagno

LUCI CUCINA

  • platform: binary
    id: luce_cucina
    name: “Luci Cucina”
    output: luci_cucina

LUCI LED CUCINA

  • platform: binary
    id: luce_led_cucina
    name: “Luci Led Cucina”
    output: luci_led_cucina

LUCI MENSOLA INGRESSO

  • platform: binary
    id: luce_mensola_ingresso
    name: “Luci Mensola Ingresso”
    output: luci_mensola_ingresso

LUCI MENSOLA BAGNO

  • platform: binary
    id: luce_mensola_bagno
    name: “Luci Mensola Bagno”
    output: luci_mensola_bagno

LUCI VIALE

  • platform: binary
    id: luce_viale
    name: “Luci Viale”
    output: luci_viale

LUCI PORTICO

  • platform: binary
    id: luce_portico
    name: “Luci Portico”
    output: luci_portico

output:

OUTPUT BAGNO

  • id: luci_bagno
    platform: gpio
    pin: GPIO1

OUTPUT CUCINA

  • id: luci_cucina
    platform: gpio
    pin: GPIO2

OUTPUT LED CUCINA

  • id: luci_led_cucina
    platform: gpio
    pin: GPIO3

OUTPUT MENSOLA INGRESSO

  • id: luci_mensola_ingresso
    platform: gpio
    pin: GPIO4

OUTPUT MENSOLA BAGNO

  • id: luci_mensola_bagno
    platform: gpio
    pin: GPIO5

OUTPUT VIALE

  • id: luci_viale
    platform: gpio
    pin: GPIO15

OUTPUT PORTICO

  • id: luci_portico
    platform: gpio
    pin: GPIO14

‘’ ’

2

English only please. https://community.home-assistant.io/t/how-to-help-us-help-you-or-how-to-ask-a-good-question/114371#zero-language-3

Also please read point 11 of that FAQ about formatting your post correctly.