Can't figure out the use of include for MQTT sensor for partial sensors

[Sir_Goodenough ((SG) WhatAreWeFixing.Today)]

Hi Pierluigi,

This is one way…

2022.7 to 2022.8 broke MQTT for me

MQTT has its own thing now in the configuration.yaml add mqtt: !include mqtt.yaml then in the mqtt.yaml file sensor: - name: "feeder ds18b20 temperature" state_topic: "tele/Feeder/SENSOR" value_template: "{{value_json['DS18B20'].Temperature }}" unit_of_measurement: "°C" binary_sensor: - name: Garage Side Door state_topic: "tele/RF_Bridge/RESULT" value_template: "{{value_json.RfReceived.Data}}" qos: 2 payload_on: "DDE20A" payload_off: "DDE20E" device…

I do it a bit different…
Configuration.yaml:

mqtt:
  - binary_sensor: !include_dir_merge_list mqtt/binary_sensor/
  - button: !include_dir_merge_list mqtt/button/
  - cover: !include_dir_merge_list mqtt/cover/
  - fan: !include_dir_merge_list mqtt/fan/
  - light: !include_dir_merge_list mqtt/light/
  - lock: !include_dir_merge_list mqtt/lock/
  - sensor: !include_dir_merge_list mqtt/sensor/
  - switch: !include_dir_merge_list mqtt/switch/

and the folder structure:
Home-Assistant-Config/mqtt at master · SirGoodenough/Home-Assistant-Config · GitHub.

It’s a dictionary of lists.