Changing the OLED display contrast at specific times

[neel-m (Neel Malik)]

@amimeu

ssd1306_i2c

This might help:

Esphome config to turn off ssd1306 OLED display with a trigger

Hi. I have configured a ssd1306 OLED display to display some sensor values. I want to turn on(loop through 3 pages) the display when the occupancy sensor is on and turn off(reduce the brightness to 0 or show a blank page) when the occupancy sensor is off. Need some help with writing the yaml logic. Here is my current config. display: - platform: ssd1306_i2c i2c_id: bus_b model: "SSD1306 128x64" id: my_display # reset_pin: D0 address: 0x3C update_interval: 1s …