Hi,
It looks like that ebusd is not able to find / load the ehp section for my Vaillant VWF 117/4 heat pump.
version: ebusd 23.2.p20230716
update check: version 23.3 available
device: 192.168.66.198:9999, enhanced, firmware 1.1[460f].1[460f]
access: "*"
signal: acquired
symbol rate: 62
max symbol rate: 167
min arbitration micros: 2
max arbitration micros: 87
min symbol latency: 6
max symbol latency: 48
scan: finished
reconnects: 0
masters: 5
messages: 516
conditional: 0
poll: 104
update: 10
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=HMU00;SW=0308;HW=0403", loaded "vaillant/08.hmu.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=CTLV2;SW=0514;HW=1104", loaded "vaillant/15.ctlv2.csv"
address 26: slave, scanned "MF=Vaillant;ID=VR_71;SW=0201;HW=0503", loaded "vaillant/26.vr_71.csv"
address 31: master #8, ebusd
address 36: slave #8, ebusd
address 71: master #9
address 76: slave #9, scanned "MF=Vaillant;ID=VWZ00;SW=0308;HW=0403"
address f1: master #10
address f6: slave #10, scanned "MF=Vaillant;ID=NETX3;SW=0121;HW=0404"
We are runing:
- flexoTHERM exclusive VWF 117/4 (brine)
- uniSTOR exclusive VIH RW 300/3 MR
- sensoCOMFORT VRC 720
- VR 71
Any ideas how to get the ehp section from the system?