Hi there! Sorry, if I missed this somewhere, but I was parsing community for such topics for a couple of days and didn’t face with the similar case. My Grid export is higher, that Produced Energy :smile: Grid Consumption is calculated using template based on three consumption entities: Grid Cons…

0 kWh Grid Consumption for now, but that’s ok. [image]

If you calculate grid export, there are bound to be problems: The way you do it, are you sure you count all consumption? In your case you do use the same sources for both templates, but measuring is always preferrable. Sensors do not update at the same time. So when adding/subtracting, you are pos…

Well, regarding new and old figures, this sounds indeed reasonable… That’s where such discrepancies could come from, you’re right… As for the consumption, of course, this is not the whole house. I’ve just started to use this feature and there’s just a couple of devices for now, which reports energy…

But you missed number three: the most important one! Installations measure what comes from the grid, but fail to see the solar production that goes straight into the devices. The energy dashboard calculates home use from grid import/export and solar. But you have (an estimate of) home use, not grid …

Yes, could be, but still this doesn’t explain to me, why Grid Export has one value, if checked via Settings --Devices–Entities, and completely another on the energy dashboard. On the same time. [1000039404] PS I tried to remove export from settings btw. Then the diagram forwards everything to the…

If you remove grid export, you still have wrong values. Reverse your export sensor (use minus solar), and put it for import. Leave export empty. If you do it right, house displays the same value as your first sensor.

All my input consumption figures are taken from one heat pump, just as a test. The only solar production figure is from panels app. [1000039413] I believe, energy dashboard transforms somehow in the background by its logic grid export value before showing on the page. Maybe it expects energy (Wh…

The graph does not show anything useful because the numbers for grid import, grid export and solar production that you are feeding don’t make sense together. If you feed it with numbers that are sensible, like I tried to describe above, the dashboard won’t need to be creative with power that seems t…

There’s a nice post about the needed calculations here.It is for Envoy, but it can be applies to other inverters too: [image] Enphase Envoy on 2024.4 Share your Projects! It’s been a few years since I wrote my original guide on how to get Enphase Envoy working with Home As…

Energy dashboard - Grid Export

Energy

Edwin_D (Edwin D.) May 12, 2024, 11:56am 10

There’s a nice post about the needed calculations here.It is for Envoy, but it can be applies to other inverters too: