EPEVER Modbus RS-485 Config

gabrielpc · August 15, 2020, 9:18am

Thanks!
I just did the same with the eBox-Wifi-01, here is my documentation:

gabrielpc1190/Home-Assistant_EPEver-eBox-Wifi-01-MODBUS/blob/master/README.md

# Home-Assistant EPEver eBox-Wifi-01 using MODBUS over TCP
How to extract data from the EPEver TRACER-AN using the eBox-Wifi-01 with Home Assistant.
+ Make sure you're able to connect your eBox-Wifi-01 to your WiFi network, so your Home Assistant can reach it!
+ Follow my quick guide here: https://github.com/gabrielpc1190/eBox-Wifi-01-hacks
+ Some of the registers that worked came from this PDF: http://www.solar-elektro.cz/data/dokumenty/1733_modbus_protocol.pdf

# modbus integration section on configuration.yaml
```
#EPEver eBox-Wifi-01 modbus
modbus:
  - type: tcp
    host: 172.16.10.98
    port: 8088
    name: hub1
    timeout: 2
#  - type: serial
#    name: hub2
#    method: rtu
#    port: /dev/ttyUSB0
#    baudrate: 115200

This file has been truncated. show original