ESPHome modbus Growatt ShineWiFi-S

ESPHome
10

Working YAML for my ShineWIFI-X

substitutions:
  devicename: "esphome-growatt-01"
  upper_devicename: "ESPHome Growatt 01"
  
esphome:
  name: $devicename
  platform: ESP8266
  board: esp07s



# Enable logging
logger:
  baud_rate: 0
  
# Enable Home Assistant API
api:

ota:
  password: !secret ota_passwd

wifi:
  ssid: !secret iot_ssid
  password: !secret iot_passwd
  fast_connect: on

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Growatt 01 Fallback Hotspot"
    password: "xxxxxxx"
    
  # Enable Web server
web_server:
  port: 80

captive_portal:

time:
  - platform: homeassistant
    id: homeassistant_time

output:
# Blue Led
  - id: light_bl
    platform: gpio
    pin: 16
# Green Led
  - id: light_gr
    platform: gpio
    pin: 0
# Red Led
  - id: light_rd
    platform: gpio
    pin: 2

uart:
  id: mod_bus
  tx_pin: 1
  rx_pin: 3
  baud_rate: 115200
  
modbus:
  id: modbus1
  uart_id: mod_bus
  
modbus_controller:
  - id: growatt
    ## the Modbus device addr
    address: 0x1
    modbus_id: modbus1
    setup_priority: -10  


sensor:
  - platform: modbus_controller
    name: "${devicename} DcPower"
    address: 5
    register_type: "read"
    unit_of_measurement: W
    device_class: power
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${devicename} DcVoltage"
    address: 3
    register_type: "read"
    unit_of_measurement: V
    device_class: voltage
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${devicename} DcInputCurrent"
    address: 4
    register_type: "read"
    unit_of_measurement: A
    device_class: current
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${devicename} AcFrequency"
    address: 37
    register_type: "read"
    unit_of_measurement: Hz
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.01
  
  - platform: modbus_controller
    name: "${devicename} AcVoltage"
    address: 38
    register_type: "read"
    unit_of_measurement: V
    device_class: voltage
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
  
  - platform: modbus_controller
    name: "${devicename} AcOutputCurrent"
    address: 39
    register_type: "read"
    unit_of_measurement: A
    device_class: current
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${devicename} AcPower"
    address: 40
    register_type: "read"
    unit_of_measurement: W
    device_class: power
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${devicename} EnergyToday"
    address: 53
    register_type: "read"
    unit_of_measurement: kWh
    device_class: energy
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${devicename} EnergyTotal"
    address: 55
    register_type: "read"
    unit_of_measurement: kWh
    state_class: total_increasing
    device_class: energy
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1

    
  - platform: modbus_controller
    name: "${devicename} Temperature"
    address: 3093
    register_type: "read"
    unit_of_measurement: C
    device_class: temperature
    icon: mdi:thermometer
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
5 Likes