I was under the impression that OZW (and by extension Home Assistant) didn’t support central scenes? https://github.com/OpenZWave/open-zwave/pull/1125
Yep, they definitely work!
How can I add the scene patch above with my python openszwave I see scene I’d but not the value. OZW log says no value
Fork the OZW repo, merge the PR, recompile OZW and replace your current OZW with it. It would be more appropriate to seek assistance from OZW resources directly than on this forum.
But patch has not been made for python ozw. How do I have to this? Sorry for dumb question
It may not be required to use central scenes with your device, Have you tested your devices with current release?
Here’s my previous post where I first was able to have this working…
I only get scene Id and this won’t work with zwave. Event
Make sure it uses central scenes and that you have your zwcfg setup right for the device. Notice I had to make updates do the config in the thread I linked before.
I added 6 values in city command class scenes. How do I know what to out there. Seems the same for me for each devices .
Like I said.I see scene id=1 service event notification but has won’t recognize it
I also have the keyfob XML file with all config parameters but my device still shows unknown in has and ozwcp
{
“receivedDups”: 0,
“averageResponseRTT”: 0,
“is_failed”: false,
“averageRequestRTT”: 0,
“node_name”: “FIBARO System Unknown: type=1001, id=1000”,
“is_info_received”: true,
“manufacturer_name”: “FIBARO System”,
“receivedTS”: "2018-01-04 00:53:01:780 ",
“lastResponseRTT”: 0,
“is_ready”: false,
“node_id”: 35,
“sentTS”: "2018-01-04 01:02:38:540 ",
“query_stage”: “CacheLoad”,
“battery_level”: 35,
“receivedUnsolicited”: 0,
“max_baud_rate”: 40000,
“sentCnt”: 1,
“wake_up_interval”: 0,
“receivedCnt”: 0,
“capabilities”: [
“beaming”,
“routing”
],
“friendly_name”: “FIBARO System Unknown: type=1001, id=1000”,
“old_entity_id”: “zwave.fibaro_system_unknown_type1001_id1000_35”,
“new_entity_id”: “zwave.fibaro_system_unknown_type1001_id1000”,
“product_name”: “Unknown: type=1001, id=1000”,
“lastRequestRTT”: 0,
“sentFailed”: 1,
“is_zwave_plus”: true,
“retries”: 0,
“is_awake”: false
}
fastest way to get this working may be to add the values to the command class description of the node in you active zwcfg. Not familiar with your device but something like this is an example of what worked for me:
Once you get that working in the zwcfg you can add the device to you OZW config device database and the same configuration will be applied on discovery of new nodes.
The device is already included.if I exclude it this section normally gets deleted. So backup and restore a after remove and re include?
Yeah! Got it running. Amazing… Thsnjs for all the help. Best community ever 
@Devanl I am trying to figure out if you ever got that Cooper Aspire 5-button scene controller to work…I’m not clear from your above comments. I have been searching for a LONG TIME for some in-wall multi-button switch I can use to trigger automations in HA, and if you’re telling me this one works I would be incredibly happy 
1 Like
I do not have it working, at a minimum I think we would need to add support for the indicator get/set command class in HA.
I made this feature request that could enable this as well but, also it works for other devices.
Couldn’t hurt to upvote either 
I’m also really interested in getting this to work. I have the device and would love to help test if any wants. Thanks! Has any progress been made?
I wrote something up to create a sensor platform that reports indicator as the entity state and has a service for calling the set command.
Traveling right now so I haven’t had time to even validate the syntax on this but, here you go if you want to take a peek. As a disclaimer, I have no idea what I am doing when it comes to the home-assistant architecture (still reading the checklist/guidelines).
Has anyone got the Cooper 5 scene controller working with hassio ? Still no? If so, would appreciate an outline of the steps taken.
I got indicator working but I’m having second thoughts about this approach. May go in and just have it setup groups on scene controller to fire scene event on HA when button is activated (pressed with indicator light off).
Good luck! I hope someone can figure this out it works in homesheer and has me wondering if I should change 