Globalcache iTach IP2SL

[andrew.vint]

I have no idea how to get Home Assistant to work with my Globalcache IP2SL.

I have a few these which I have used in past projects such as DemoPad to control an HDMI matrix and and Amp.

Has anyone out there managed to get these to work in there own setup ?

https://www.globalcache.com/products/itach/ip2slspecs/

[andrew.vint]

That will be a no then

[Dansker]

I use Global Cache IP2SL and IP2IR devices at some sites. Would be nice to have with the Monoprice whole house audio amp (already supported by Home Assistant) and other RS232 devices.

[tom_l]

I’ve got the IP2IR working. No idea about the IP2SL though.

[andrew.vint]

Think I am going to look at this in a different way, the IP2SL was to control my ATEM HDMI Matrix.

I can also control it from Telnet so going to see if I can get the same results from a different angle.

[SOLVED] Switch using Telnet Commands to 8x8 ATEN HDMI Matrix

I seen in some previous posts that the switch command can be used to send Telnet commands. I have tested my HDMI matrix using Telnet and I can control it as expected, however my issue is that I cant send the commands from Hass.IO as the telnet session requires a username and password. Is there a way to do this ?