Help with UART on ESP32-C6-DevKitC-1

[Karosm]

I was just helping yesterday one guy with 2 UART connections.

ESP32-C6 with Two A02YYUW Sensors: Crashes When Second Sensor Is Enabled

I don’t know your board and how usb serial is implemented, but you could try disabling it: logger: baud_rate: 0 also, try with default uart0 pins: uart: - id: uart_1 tx_pin: GPIO16 rx_pin: GPIO17 baud_rate: 9600

Are you sure you have debug configured correctly?

@hb9ezs

I‘m might buy a different ESP board for this project, doesn‘t have to be the C6

Wroom32 would take out 99% of odds…