Hey Giel, I tried to use your “binary movement sensor”
but on checking config there’s something invalid:
Invalid config for [sensor.template]: value is not allowed for dictionary value @ data['sensors']['netatmo_webhook_trigger']['device_class']. Got 'motion'. (See ?, line ?).
Are there any changes at device_class in the mean time?
I’m desperate. I just can’t make the netatmo webhooks work. Found this in my logs:
## Log Details (ERROR)
Logger: homeassistant.components.netatmo
Source: components/netatmo/__init__.py:142
Integration: netatmo ([documentation](https://www.home-assistant.io/integrations/netatmo), [issues](https://github.com/home-assistant/home-assistant/issues?q=is%3Aissue+is%3Aopen+label%3A%22integration%3A+netatmo%22))
First occurred: 8:58:58 PM (1 occurrences)
Last logged: 8:58:58 PM
Error during webhook registration - 400 - Bad request - Allowed ports for webhooks are 443 and 80. (21) when accessing 'https://api.netatmo.com/api/addwebhook'
The mentioned ports are free in my router.
Is there anybody who can help?
I also have problems to get MQTT run (see my post above). I´m completely new at MQTT.
I added
mqtt:
to my configuration.yaml and installed “Mosquitto Broker” add-on. Is my device_class problem an mqtt-problem?
Sorry, but it`s all new for me. 
Did you follow the instructions in the documentation? Did you double check the http config in your configuration.yaml? Do you use a reverse proxy?
Hey Tobi, my http config is
http:
base_url: !secret http_base_url
ssl_certificate: /ssl/fullchain.pem
ssl_key: /ssl/privkey.pem
http_base_url: https://xxx.ddns.net:8123
I don’t use a reverse proxy.
Yes, I followed instructions but I’m not sure if everything is allright. I’ve done my best. Have you any hints what I can look for? Which docu do you mean exactly? So much new stuff for me. It’s a little bit confusing.
Hi,
If you access specifying the 8123 port, that means that you redirected that port to your home Assistant on your router? Did you also redirect port 443 and/or 80? This is requested for the webhook.
Cheers
Sorry for the late response, I’ still using the same config.
I use binary_sensor: !include_dir_merge_list devices/binary_sensors in my configuration.yaml
And the I have a netatmo.yaml file in that directory which contains
- platform: template
sensors:
netatmo_webhook_trigger:
device_class: motion
friendly_name: Netatmo webhook trigger
value_template: "{{ is_state('sensor.netatmo_webhook_trigger', 'NOC-human') }}"
Just to clarify, this thread predates the current implementation of the webhook based Netatmo event. Please be aware things have changed quite a bit and make sure you read the documetation.
Yes, I do! But reading something is often not the same as understanding. Webhooks und MQTT is completely new for me. I try my best. But seems it´s not enough. 
Updated my http-config 
Updated port-forwarding in router
Followed instructions from Netatmo in HA 0.105
=> Everythings works fine!!!
THANX!!! 
Please, someone help me! I have been working on this for many days. I finally managed to make webhooks work! Now I get netatmo_event but I can’t use the webhook trigger.
- alias: Net2
description: 'Motion detected at home'
trigger:
- event_type: netatmo_event
platform: event
event_data:
type: movement # other possible types: animal, vehicle
action:
- service: persistent_notification.create
data_template:
notification_id: "movement"
title: "Netatmo event"
message: "movement"
This works!
alias: Netatmo Webhook
initial_state: 'on'
trigger:
platform: webhook
webhook_id: netatmo_webhook
action:
- service: mqtt.publish
data_template:
topic: 'netatmo/update'
retain: true
payload_template: >
{{ trigger.json | tojson }}
This doesn’t work, I don’t know what else to do!
my webhook URL: https://XXXXX.duckdsn.org/api/webhook/netatmo_webhook
The Netatmo webhook event is meant to be used in the way you show in the first example.
Thank you for your answer. So there is no way to do something like the second example 
Not sure what you prefer in the second example. If what you need is access to the trigger data, this is possible with {{ trigger.event.data }}. Here’s my own automation that creates custom notification on netatmo events:
- id: netatmoevent
alias: Netatmo Event
description: door or window is open or was moved
trigger:
- event_data: {}
event_type: netatmo_event
platform: event
condition:
- condition: template
value_template: '{{ trigger.event.data.data.snap != "topology_changed" }}'
action:
- service: shell_command.get_image_and_resize
data_template:
name: '"{{ trigger.event.data.data.snapshot_id }}"'
url: '{{ trigger.event.data.data.snapshot_url }}'
- service: persistent_notification.create
data_template:
message: >-
{{ trigger.event.data.data.message }}\n
{% if trigger.event.data.data.snapshot_url %}
{% endif %}
notification_id: '{{ trigger.event.data.data.message }}'
title: >-
Netatmo event:
{% if trigger.event.data[\"type\"] == \"tag_big_move\" %}
Big Move
{% elif trigger.event.data[\"type\"] == \"tag_small_move\" %}
Small Move
{% elif trigger.event.data[\"type\"] == \"tag_open\" %}
Still Open
{% else %}
{{trigger.event.data[\"type\"]}}
{% endif %}
Events are not fully documented in the HA documentation, but you already have several examples, and you can refer to the Netatmo API documentation for further details. To give credit to @cgtobi, Netatmo’s documentation is not very good, and a lot of what is known has been discovered through trials and errors. You can use the developper tool event listener to get the full content of the events you receive and adapt your automation accordingly.
Hi Francesco,
what exactly do you want to achieve? Just relay the event via mqtt?
Check if this simple relay of Netatmo events to MQTT is what you’re looking for.
I just noticed after playing with it that @gieljnssns had already posted an example which is actually linked in the cookbook as well.
@vlebourl @cgtobi
Thank you guys. Your directions was just what I needed. Thank you so much
It works fine
- alias: Netatmo Event
description: door or window is open or was moved
trigger:
- event_data: {}
event_type: netatmo_event
platform: event
action:
- service: persistent_notification.create
data_template:
message: >
{% if is_state('persistent_notification.netatmo' , 'notifying') %}
{{ states.persistent_notification.netatmo.attributes.message }}
[{{ now().strftime('%H:%M') }}] - Messaggio: {{ trigger.event.data.data.message }} - tipo evento: {{ trigger.event.data.data.event_type }}
{% else %}
[{{ now().strftime('%H:%M') }}] - Messaggio: {{ trigger.event.data.data.message }} - tipo evento: {{ trigger.event.data.data.event_type }}
{% endif %}
notification_id: "test"
title: "ciccio"
- service: mqtt.publish
data_template:
payload: '{{ trigger.event.data | tojson }}'
retain: true
topic: netatmo/update
Hello guys. I would like to create an automatization based on the movement data from the Netatmo camera. I need to run a specific service if Netatmo camera detect a movement of human or animal, but I am totally beginner with this, so I have no idea how to „write this“ into configuration? I have working Netatmo integration where I am getting the video from the camera (in HA), but I don’t know how to „write“ this special condition? Could someone help me please?
you can use the event trigger listening to netatmo_event, and filtering according to {{trigger.event.data[\"type\"]}} for instance.
Have a look at previous posts to get examples.
Here’s an exemple of an event received from the welcome camera:
event:
event_type: netatmo_event
data:
type: movement
data:
user_id: xxxxREDACTEDxxxx
event_type: movement
camera_id: xxxxREDACTEDxxxx
device_id: xxxxREDACTEDxxxx
home_id: xxxxREDACTEDxxxx
home_name: xxxxREDACTEDxxxx
message: 'xxxxREDACTEDxxxx: Mouvement détecté par CamSalon'
push_type: NACamera-movement
device_id: xxxxREDACTEDxxxx
origin: LOCAL
time_fired: '2022-08-12T15:00:58.556991+00:00'
context:
id: 01GA9957HW35A6BAS5ZBC7H811
parent_id: null
user_id: null
description: event 'netatmo_event'
Hi Vincent, I do have somehow the same challenge, but due to a lag of knowledge so far no idea how to apply this filter you descripted in the trigger part of an automation.
Blockquote
event_type: netatmo_event
platform: event
event_data:
type: human
This is working so far, to trigger an action.
Now I want to include the camera id from where the recognition has been sent.
Format is following:
Blockquote
event:
event_type: netatmo_event
data:
type: human
data:
user_id: xxxxxxxxxxxxxxxxxxxxxxxx
snapshot_id: xxxxxxxxxxxxxxxxxxxx
event_type: human
camera_id: xx:xx:xx:xx:76:9e
device_id: xx:xx:xx:xx:76:9e
message: Person erfasst Haustür
push_type: NDB-human