I made an MQTT Motion Detector

[gpbenton (Graham)]

@FiServedPi

had anything else had this problem?

Yes

NodeMCU PIR Sensor Not Stable

Hi All, I have created a motion sensor but the problem is that is not reliable. Sometimes goes into detects mode but in fact there is no movement at all. I have many doubts on the hardware (nodemcu, pir sensor, wires or power supply). I have installed EspEasy in nodemcu and I have this configuration in HA. binary_sensor: - platform: mqtt name: "Motion Living Room" state_topic: "/Nodemcu/Motion/Motion" command_topic: "/Nodemcu/gpio/15" payload_on: "1" payload_off: "0" …