Inovelli Z-Wave Red Series Notification LED

BrianHanifin · May 11, 2021, 2:49am

I don’t recall how we started using the zero, but I can tell you that it worked with previous Zwave integrations that I have used.

Thank you for resolving this! I noticed my effect wasn’t clearing, but I hadn’t had a chance to troubleshoot it yet.

Updated code below:

github.com

brianhanifin/Home-Assistant-Config/blob/e62794c5578a3b12657081fb49c29da9b5ee9482/scripts/notifications/inovelli_led/inovelli_led.yaml

---
# Calculation References:
#   https://nathanfiscus.github.io/inovelli-notification-calc/
#   https://community.inovelli.com/t/home-assistant-2nd-gen-switch-rgb-working/168/62
#   https://docs.google.com/spreadsheets/d/1bEpujdvBPZY9Fl61PZLUWuHanD2VAkRORFZ5D9xjLzA/edit?usp=sharing
#
# Changes:
#   July 22, 2020: Incorporating changes from Kevin Schlichter.
#     https://github.com/kschlichter/Home-Assistant-Inovelli-Red-Dimmer-Switch
#
#   September 17, 2020: There are some massive improvements to my version of this code. Here are the highlights:
#     1. Choose - using the recently added choose: feature a separate call has been created for the Z-wave and OZW
#        versions of the service call.
#     2. Variables - using 0.115’s new variables: feature the variables sent each service call only have to be 
#        calculated once.
#     3. Supported Features - I realized that I could probably tell the difference between modules using the 
#        “supported_features” attribute of each switch. For example my dimmer’s supported features is “33”.
#
#   September 18, 2020: Added "model" parameter with options of dimmer, switch, combo_light, combo_fan. This replaces
#     supported_features as the combo fan/light switch also had the same supported_features value.

This file has been truncated. show original