Hi, do you know, if it’s possible to create entitites in disabled state when adding spa to HA?
You could probably disable some switches for known models.
For example I have Greywood deluxe for 4 people and there are no jets and no sanitizer (i believe - what does it do?) - these controls are not shown in intex app, but you can still call the on/off commands using your library and the spa control unit responds to it and renders state in response
Most challenging part is to assert that our interpretation of the spa info message is accurate, so that the spa model is correct. And to map the corresponding features (easy).
Thanks for following up.
About the UID sensor… well… It works for me.
Did you switch the entity status to enable, as below ?
If explicitely enabled and the UID does not appear after a few minutes with a page refresh, could you copy the intex_spa logs please ?
You can, or I will, open an issue.
thanks, I missed the entity activation part (I didn’t have much time before going back to work).
here is the UID : 0K040220082021081800019136
the model is PureSpa SC-WF20, I’ll have a look at the ref this evening and try to make the app woek and add the spa to get its name
I’m spending much time trying to understand the uid… Could you tell me what is the exact complete model written on your pump ?
For example, mine is 21SC-WF20**A0
I have a problem when the utility Company cut the suply and i’m not at home, when the power returns the spa remain in E82 error and the entities are disable.Is necesary to puch manually the reset botton to recover the integracion funcionality. Some idea to do a reset order by software or to avoid this problem?
Hi @loyra , and thank you for your contribution.
Do you mean the reset button on the electrical protection box close to the plug ?
If you mean this one, this is a mandatory mecanical button push. No software can prevent this.
Yes is the reset button near the plug, i have a automation to filter every day and if the utility company cut the power only one second i lost the integration until puch the reset button . Ok , i can live with that.Thanks.