Home Assistant Community

Is there a Hassio for Synology (Docker)?

#1

I have had a raspberry and used Hassio, in Hassio Zwave works. But i got rit off the nasty bugs on Sdhc cards so i switched to normal HomeAssistant in Docker for Synology DS218+
Too bad installing zwave on Home Assistant does not work, i tried with /dev/serial/by-id but it dit not work, maybe its the wrong port? Too bad on the normal HomeAssistant you cannot change Zwave, just only 1 time, there is no zwave config?
So i think the best option should be a Hassio for Docker (Synology).

0 Likes

#2

If you have enough RAM Use the Virtual Machine Manager Synology DS 218+ installation problem

0 Likes

#3

Sure it does. I run zwave on docker.

??

0 Likes

#4

Here the log of OZW (zwave)
2019-03-10 13:57:03.602 Always, OpenZwave Version 1.4.3322 Starting Up
2019-03-10 14:07:40.888 Error, Options have been locked. No more may be added.
2019-03-10 14:07:40.889 Error, Options have been locked. No more may be added.
2019-03-10 14:07:40.889 Error, Options are already final (locked).
2019-03-10 14:08:04.862 Info, Setting Up Provided Network Key for Secure Communications
2019-03-10 14:08:04.863 Info, mgr, Added driver for controller /dev/ttyS0
2019-03-10 14:08:04.869 Info, Opening controller /dev/ttyS0
2019-03-10 14:08:04.869 Info, Trying to open serial port /dev/ttyS0 (attempt 1)
2019-03-10 14:08:04.871 Info, Serial port /dev/ttyS0 opened (attempt 1)
2019-03-10 14:08:04.873 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
2019-03-10 14:08:04.873 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
2019-03-10 14:08:04.873 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
2019-03-10 14:08:04.873 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
2019-03-10 14:08:04.873 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
2019-03-10 14:08:04.873 Detail,
2019-03-10 14:08:04.873 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) - FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
2019-03-10 14:08:05.873 Error, contrlr, ERROR: Dropping command, expected response not received after 1 attempt(s)
2019-03-10 14:08:05.873 Detail, contrlr, Removing current message
2019-03-10 14:08:05.873 Detail, contrlr, Notification: Notification - TimeOut
2019-03-10 14:08:05.874 Detail,
2019-03-10 14:08:05.874 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x20) - FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
2019-03-10 14:08:06.874 Error, contrlr, ERROR: Dropping command, expected response not received after 1 attempt(s)
2019-03-10 14:08:06.875 Detail, contrlr, Removing current message
2019-03-10 14:08:06.875 Detail, contrlr, Notification: Notification - TimeOut
2019-03-10 14:08:06.875 Detail,
2019-03-10 14:08:06.875 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x05) - FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
2019-03-10 14:08:07.875 Error, contrlr, ERROR: Dropping command, expected response not received after 1 attempt(s)
2019-03-10 14:08:07.875 Detail, contrlr, Removing current message
2019-03-10 14:08:07.875 Detail, contrlr, Notification: Notification - TimeOut
2019-03-10 14:08:07.876 Detail,
2019-03-10 14:08:07.876 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x07) - FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
2019-03-10 14:08:08.876 Error, contrlr, ERROR: Dropping command, expected response not received after 1 attempt(s)
2019-03-10 14:08:08.876 Detail, contrlr, Removing current message
2019-03-10 14:08:08.876 Detail, contrlr, Notification: Notification - TimeOut
2019-03-10 14:08:08.877 Detail,
2019-03-10 14:08:08.877 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x56) - FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
2019-03-10 14:08:09.877 Error, contrlr, ERROR: Dropping command, expected response not received after 1 attempt(s)
2019-03-10 14:08:09.877 Detail, contrlr, Removing current message
2019-03-10 14:08:09.877 Detail, contrlr, Notification: Notification - TimeOut

0 Likes

#5

I have search under hardware and there were 4 serial options: /dev/ttyS0 /dev/ttyS1
/dev/ttyS2 and /dev/ttyS3 i tried them all, and always the system gives Succes!
Too bad, also always this entity has no devices.

Too bad on Hassio there is no SSH possible, so i can not do ls -ltr /dev/tty*|tail -n 1 to find out the real serial port.

0 Likes

#6

Installed on Virtual Machine Manager tried every usb port for my Aeotec zwave v5 stick
At installation it says succes on every usb Port but also there is never a Zwave menu and says This integration has no devices!
When i change to my old Rasp with Hassio, then i immediately got zwave menu and say heal and start, worked. But i want to get rit of the raspberry with its crappy sdhc cards.

0 Likes