Jablotron JA-80 series and JA-100 series alarm integration

Third party integrations
3

Hi,

It is very interesting configuration. Much better than what i did. Potentialy it will be able to read status from wireless sensors as well - is that correct?

I already plugged in my JA-80T USB cable to the raspberry and start testing your integration.
Didnt get it to work so far as states is Unavailable.
My config is very simple:

  • platform: jablotron
    serial_port: /dev/ttyUSB0

Serial port is correct as its appeared on the hassio system tab under the hardware list.

Any ideas?

Thanks
Artur