Hi,
I have worked (googled) for hours and hours to get my old switches and dimmers in HA. They work great, i can use them in Homeassistant. So far, so good. What I can’t seem to do is, add them to the Lovelace dashboard on the same line, shown as a input_number (slider) and toggle/switch.
What I would like to achieve is this:
My working code:
input_number:
dimmer1:
name: Stekker 8
initial: 0
min: 0
max: 255
step: 1
shell_command:
dimmer1: "curl -k http://IP/PW/sw/dim/7/{{ '%03d'|format(states('input_number.dimmer1')|int) }}"
dimmer1_off: "curl -k http://IP/PW/sw/dim/7/off"
light:
- platform: template
lights:
dimmer1:
friendly_name: "stekker 8"
value_template: "{{ states('input_number.dimmer1') | int >= 1 }}"
level_template: "{{ states('input_number.dimmer1') | int }}"
turn_on:
- service: input_number.set_value
data:
entity_id: input_number.dimmer1
value: 255
- service: shell_command.dimmer1
turn_off:
- service: input_number.set_value
data:
entity_id: input_number.dimmer1
value: 0
- service: shell_command.dimmer1_off
set_level:
- service: input_number.set_value
data_template:
entity_id: input_number.dimmer1
value: "{{ brightness }}"
- service: shell_command.dimmer1
- alias: Dimmer1
id: '1513037592911'
trigger:
- entity_id: input_number.dimmer1
platform: state
action:
- service: shell_command.dimmer1
Is there anyway to do this, using an input_number and a switch? Any help is appreciated. I have looked at the Thomas Loven add on, light groups, groups. But I can’t do it.
Jaap