Hello, Doudz component has progressed far more than mine and I would recommand anyone who would like to have an “up to date” zigate support to switch to his ( https://community.home-assistant.io/t/another-component-for-zigate/ ). While I don’t use it personnaly, the response from the community seems …

Update: I added firing an event by adapting in sensors.py (I added a reference to self._hass = hass in the constructor): def update_attributes(self, property_id, property_data): self._attributes[property_id] = property_data self.schedule_update_ha_state() if property_i…

Illuminance seems not working for me :frowning: platform: zigate name: ‘illuminance 2’ address: b4b501 default_state: ‘illuminance’ default_unit: ‘lx’ I already add the motion sensor as a switch (in order to control yeeligh): platform: zigate name: ‘sensor2’ address: b4b501 default_state…

Hi, Don’t know if this should be considered off topic or not, but does anyone know how to get the multiple values in a single history graph? For example, my Xiaomi temperature sensor reports temperature, humidity and battery status… But the history graph only displays one. I’m fairly new to HA and…

I suppose you’ll get them displayed separately. As 3 badges or 3 entry in the interface.And depending on which value you click you’ll see one or the other graph. It’s possible to display several graph in one, but it’s not a default behaviour.

[image] touliloup: It’s possible to display several graph in one, but it’s not a default behaviour. And that’s exactly what my question was… How do I do that? All three values belong to the same sensor. When I click the sensor, I get the history graph with one value (temperature) and underne…

Then yes, it’s off topic ^^ But here you go, you can achieve that with grafana (not really simple though): [image] Complete guide on setting up Grafana/InfluxDB with Home assistant using official Docker images Share your Projects! I know there are already a few tutorials…

I’m using influxDB and grafana, if someone need help i may help :slight_smile: EDIT : after reinstalling evrything, still no illuminance. I continue to investigate :slight_smile: EDIT 2 : In my pyzigate folder ( 0.1.3.post1) i have illuminance information : interface.py: b'0400': 'Me…

Just to be sure, which motion sensor are you using? The older one does not provide illumination information… Which Zigate firmware do you have installed on your stick?

Hello I’m using the last firmware 0d. In home assistant, the motion detector is detected as “aq2” . The brand “aquara” is written on the top of the detector. According Gearbest it’s “V2”.

Hi guys, I have a problem. I’m trying to setup the zigate component by unzipping the files into custom_components under hassio/config/. After this, I add this to my configuration file: #Enable ZiGate zigate: So far so good, but when I do the configuration validation it comes back with the follow…

New custom component : ZiGate (obsolete)

Development

touliloup (Romain) March 12, 2018, 2:12pm 173

Then yes, it’s off topic ^^

But here you go, you can achieve that with grafana (not really simple though):