Hello everyone, here’s my acienne sonette my laché the moment we evolve and we pass on the formidable Doorbell of Reolink , well it all works as I want, in my search for a nice case and hiding the big holes I come across this
https://www.thingiverse.com/thing:6010258
with a slot for a fingerprint reader, ca well I have one that hangs in the drawers… we will integrate it then; but we will try to refine because I also have an RFId reader that pulls… and to finalize I would like to integrate a small oled to display the names.
well then what works perfectly,
The FingerReader
Finger
uart:
tx_pin: D0 # Or GPIO17 for ESP32
rx_pin: D1 # Or GPIO16 for ESP32
baud_rate: 57600
fingerprint_grow:
sensing_pin: D2 # Or GPIO05 for ESP32
on_finger_scan_matched:
- switch.turn_on: trigger_relay
- fingerprint_grow.aura_led_control:
state: BREATHING
speed: 200
color: BLUE
count: 1
- text_sensor.template.publish:
id: fingerprint_state
state: "Authorized finger"
on_finger_scan_unmatched:
- fingerprint_grow.aura_led_control:
state: FLASHING
speed: 25
color: RED
count: 2
- text_sensor.template.publish:
id: fingerprint_state
state: "Unauthorized finger"
on_enrollment_scan:
- fingerprint_grow.aura_led_control:
state: FLASHING
speed: 25
color: BLUE
count: 2
- fingerprint_grow.aura_led_control:
state: ALWAYS_ON
speed: 0
color: PURPLE
count: 0
- text_sensor.template.publish:
id: fingerprint_state
state: "Finger scanned"
on_enrollment_done:
- fingerprint_grow.aura_led_control:
state: BREATHING
speed: 100
color: BLUE
count: 2
- text_sensor.template.publish:
id: fingerprint_state
state: "Enrolled fingerprint"
on_enrollment_failed:
- fingerprint_grow.aura_led_control:
state: FLASHING
speed: 25
color: RED
count: 4
- text_sensor.template.publish:
id: fingerprint_state
state: "Failed to enroll fingerprint"
text_sensor:
- platform: template
id: fingerprint_state
name: "Garage Fingerprint State"
sensor:
- platform: fingerprint_grow
fingerprint_count:
name: "Garage Fingerprint Count"
id: fingerprint_count
last_finger_id:
name: "Garage Fingerprint Last Finger ID"
last_confidence:
name: "Garage Fingerprint Last Confidence"
status:
name: "Garage Fingerprint Status"
capacity:
name: "Garage Fingerprint Capacity"
security_level:
name: "Garage Fingerprint Security Level"
api:
password: !secret api_password
services:
- service: enroll
variables:
finger_id: int
num_scans: int
then:
- fingerprint_grow.enroll:
finger_id: !lambda 'return finger_id;'
num_scans: !lambda 'return num_scans;'
- service: enroll_next # Idea by Ralf Klüber (thanks!)
variables:
num_scans: int
then:
- fingerprint_grow.enroll:
finger_id: !lambda 'return id(fingerprint_count).state;'
num_scans: !lambda 'return num_scans;'
- service: cancel_enroll
then:
- fingerprint_grow.cancel_enroll:
- service: delete
variables:
finger_id: int
then:
- fingerprint_grow.delete:
finger_id: !lambda 'return finger_id;'
- service: delete_all
then:
- fingerprint_grow.delete_all:
The adonno readerTag code:
# Insert your SSID and Your PWD after inital setup
wifi:
# networks:
# - ssid: 'REPLACEME' # Enter your WiFi SSID here. Example: `ssid: 'your_network_name'`
# password: 'REPLACEME' # Enter your wifi password here. Example: `password: 'abcde123456'`
ap:
ssid: ${name}
# Enable the captive portal for inital WiFi setup
captive_portal:
dashboard_import:
package_import_url: github://adonno/tagreader/tagreader.yaml
improv_serial:
substitutions:
name: tagreader
friendly_name: TagReader
esphome:
name: $name
platform: ESP8266
board: d1_mini
# Automatically add the mac address to the name
# so you can use a single firmware for all devices
name_add_mac_suffix: true
# This will allow for (future) project identification,
# configuration and updates.
project:
name: adonno.tag_reader
version: "1.4"
# If buzzer is enabled, notify on api connection success
on_boot:
priority: -10
then:
- wait_until:
api.connected:
- logger.log: API is connected!
- rtttl.play: "success:d=24,o=5,b=100:c,g,b"
- light.turn_on:
id: activity_led
brightness: 100%
red: 0%
green: 0%
blue: 100%
flash_length: 500ms
- switch.turn_on: buzzer_enabled
- switch.turn_on: led_enabled
# Define switches to control LED and buzzer from HA
switch:
- platform: template
name: "${friendly_name} Buzzer Enabled"
id: buzzer_enabled
icon: mdi:volume-high
optimistic: true
restore_mode: RESTORE_DEFAULT_ON
entity_category: config
- platform: template
name: "${friendly_name} LED enabled"
id: led_enabled
icon: mdi:alarm-light-outline
optimistic: true
restore_mode: RESTORE_DEFAULT_ON
entity_category: config
# Define buttons for writing tags via HA
button:
- platform: template
name: Write Tag Random
id: write_tag_random
# Optional variables:
icon: "mdi:pencil-box"
on_press:
then:
- light.turn_on:
id: activity_led
brightness: 100%
red: 100%
green: 0%
blue: 100%
- lambda: |-
static const char alphanum[] = "0123456789abcdef";
std::string uri = "https://www.home-assistant.io/tag/";
for (int i = 0; i < 8; i++)
uri += alphanum[random_uint32() % (sizeof(alphanum) - 1)];
uri += "-";
for (int j = 0; j < 3; j++) {
for (int i = 0; i < 4; i++)
uri += alphanum[random_uint32() % (sizeof(alphanum) - 1)];
uri += "-";
}
for (int i = 0; i < 12; i++)
uri += alphanum[random_uint32() % (sizeof(alphanum) - 1)];
auto message = new nfc::NdefMessage();
message->add_uri_record(uri);
ESP_LOGD("tagreader", "Writing payload: %s", uri.c_str());
id(pn532_board).write_mode(message);
- rtttl.play: "write:d=24,o=5,b=100:b"
- wait_until:
not:
pn532.is_writing:
- light.turn_off:
id: activity_led
- rtttl.play: "write:d=24,o=5,b=100:b,b"
- platform: template
name: Clean Tag
id: clean_tag
icon: "mdi:nfc-variant-off"
on_press:
then:
- light.turn_on:
id: activity_led
brightness: 100%
red: 100%
green: 64.7%
blue: 0%
- lambda: 'id(pn532_board).clean_mode();'
- rtttl.play: "write:d=24,o=5,b=100:b"
- wait_until:
not:
pn532.is_writing:
- light.turn_off:
id: activity_led
- rtttl.play: "write:d=24,o=5,b=100:b,b"
- platform: template
name: Cancel writing
id: cancel_writing
icon: "mdi:pencil-off"
on_press:
then:
- lambda: 'id(pn532_board).read_mode();'
- light.turn_off:
id: activity_led
- rtttl.play: "write:d=24,o=5,b=100:b,b"
- platform: restart
name: "${friendly_name} Restart"
entity_category: config
# Enable logging
logger:
# level: VERY_VERBOSE
# level: VERBOSE
# Enable Home Assistant API
api:
services:
- service: rfidreader_tag_ok
then:
- rtttl.play: "beep:d=16,o=5,b=100:b"
- service: rfidreader_tag_ko
then:
- rtttl.play: "beep:d=8,o=5,b=100:b"
- service: play_rtttl
variables:
song_str: string
then:
- rtttl.play: !lambda 'return song_str;'
- service: write_tag_id
variables:
tag_id: string
then:
- light.turn_on:
id: activity_led
brightness: 100%
red: 100%
green: 0%
blue: 0%
- lambda: |-
auto message = new nfc::NdefMessage();
std::string uri = "https://www.home-assistant.io/tag/";
uri += tag_id;
message->add_uri_record(uri);
id(pn532_board).write_mode(message);
- rtttl.play: "write:d=24,o=5,b=100:b"
- wait_until:
not:
pn532.is_writing:
- light.turn_off:
id: activity_led
- rtttl.play: "write:d=24,o=5,b=100:b,b"
- service: write_music_tag
variables:
music_url: string
music_info: string
then:
- light.turn_on:
id: activity_led
brightness: 100%
red: 100%
green: 0%
blue: 0%
- lambda: |-
auto message = new nfc::NdefMessage();
std::string uri = "";
std::string text = "";
uri += music_url;
text += music_info;
if ( music_url != "" ) {
message->add_uri_record(uri);
}
if ( music_info != "" ) {
message->add_text_record(text);
}
id(pn532_board).write_mode(message);
- rtttl.play: "write:d=24,o=5,b=100:b"
- wait_until:
not:
pn532.is_writing:
- light.turn_off:
id: activity_led
- rtttl.play: "write:d=24,o=5,b=100:b,b"
# Enable OTA upgrade
ota:
- platform: esphome
i2c:
scan: False
frequency: 400kHz
globals:
- id: source
type: std::string
- id: url
type: std::string
- id: info
type: std::string
pn532_i2c:
id: pn532_board
on_tag:
then:
- if:
condition:
switch.is_on: led_enabled
then:
- light.turn_on:
id: activity_led
brightness: 100%
red: 0%
green: 100%
blue: 0%
flash_length: 500ms
- delay: 0.15s #to fix slow component
- lambda: |-
id(source)="";
id(url)="";
id(info)="";
if (tag.has_ndef_message()) {
auto message = tag.get_ndef_message();
auto records = message->get_records();
for (auto &record : records) {
std::string payload = record->get_payload();
std::string type = record->get_type();
size_t hass = payload.find("https://www.home-assistant.io/tag/");
size_t applemusic = payload.find("https://music.apple.com");
size_t spotify = payload.find("https://open.spotify.com");
size_t sonos = payload.find("sonos-2://");
size_t mass_deezer = payload.find("deezer://");
size_t mass_filesystem_local = payload.find("filesystem_local://");
size_t mass_filesystem_smb = payload.find("filesystem_smb://");
size_t mass_plex = payload.find("plex://");
size_t mass_qobuz = payload.find("qobuz://");
size_t mass_radiobrowser = payload.find("radiobrowser://");
size_t mass_soundcloud = payload.find("soundcloud://");
size_t mass_spotify = payload.find("spotify://");
size_t mass_tidal = payload.find("tidal://");
size_t mass_tunein = payload.find("tunein://");
size_t mass_ytmusic = payload.find("ytmusic://");
if (type == "U" and hass != std::string::npos ) {
ESP_LOGD("tagreader", "Found Home Assistant tag NDEF");
id(source)="hass";
id(url)=payload;
id(info)=payload.substr(hass + 34);
}
else if (type == "U" and applemusic != std::string::npos ) {
ESP_LOGD("tagreader", "Found Apple Music tag NDEF");
id(source)="amusic";
id(url)=payload;
}
else if (type == "U" and spotify != std::string::npos ) {
ESP_LOGD("tagreader", "Found Spotify tag NDEF");
id(source)="spotify";
id(url)=payload;
}
else if (type == "U" and sonos != std::string::npos ) {
ESP_LOGD("tagreader", "Found Sonos app tag NDEF");
id(source)="sonos";
id(url)=payload;
}
else if (type == "U" && (mass_deezer != std::string::npos ||
mass_filesystem_local != std::string::npos ||
mass_filesystem_smb != std::string::npos ||
mass_plex != std::string::npos ||
mass_qobuz != std::string::npos ||
mass_radiobrowser != std::string::npos ||
mass_soundcloud != std::string::npos ||
mass_spotify != std::string::npos ||
mass_tidal != std::string::npos ||
mass_tunein != std::string::npos ||
mass_ytmusic != std::string::npos)) {
ESP_LOGD("tagreader", "Found Music Assistant tag NDEF");
id(source) = "mass";
id(url) = payload;
}
else if (type == "T" ) {
ESP_LOGD("tagreader", "Found music info tag NDEF");
id(info)=payload;
}
else if ( id(source)=="" ) {
id(source)="uid";
}
}
}
else {
id(source)="uid";
}
- if:
condition:
lambda: 'return ( id(source)=="uid" );'
then:
- homeassistant.tag_scanned: !lambda |-
ESP_LOGD("tagreader", "No HA NDEF, using UID");
return x;
else:
- if:
condition:
lambda: 'return ( id(source)=="hass" );'
then:
- homeassistant.tag_scanned: !lambda 'return id(info);'
else:
- homeassistant.event:
event: esphome.music_tag
data:
reader: !lambda |-
return App.get_name().c_str();
source: !lambda |-
return id(source);
url: !lambda |-
return id(url);
info: !lambda |-
return id(info);
- if:
condition:
switch.is_on: buzzer_enabled
then:
- rtttl.play: "success:d=24,o=5,b=100:c,g,b"
on_tag_removed:
then:
- homeassistant.event:
event: esphome.tag_removed
# Define the buzzer output
output:
- platform: esp8266_pwm
pin: D7
id: buzzer
binary_sensor:
- platform: status
name: "${friendly_name} Status"
entity_category: diagnostic
text_sensor:
- platform: version
hide_timestamp: true
name: "${friendly_name} ESPHome Version"
entity_category: diagnostic
- platform: wifi_info
ip_address:
name: "${friendly_name} IP Address"
icon: mdi:wifi
entity_category: diagnostic
ssid:
name: "${friendly_name} Connected SSID"
icon: mdi:wifi-strength-2
entity_category: diagnostic
# Define buzzer as output for RTTTL
rtttl:
output: buzzer
# Configure LED
light:
- platform: neopixelbus
variant: WS2812
pin: D8
num_leds: 1
flash_transition_length: 500ms
type: GRB
id: activity_led
name: "${friendly_name} LED"
restore_mode: ALWAYS_OFF
for the display i found that
i2c:
sda: GPIO21
scl: GPIO22
display:
- platform: ssd1306_i2c
model: "SSD1306 128x64"
address: 0x3C
rotation: 180°
lambda: |-
// Draw rectangle
// it.rectangle(0, 0, 128, 64);
it.print(2, 12, id(kaushanscript), "<your name here>");
font:
# gfonts://family[@weight]
- file: "gfonts://Kaushan Script"
id: kaushanscript
size: 33
################
I would need your help for the code and do only one for all, especially since we have to see at the level of pins because they use the same…
I believe it is possible by the following evidence:
https://www.youtube.com/watch?v=lx3SpkEEaVg
it works well in its demo, but with its codes I do not know because the mr did not post his code
finally here thanks for your help