Newbie question on Multiisenor 6

[Cyclops32 (Rob)]

I am pretty new to Home Assistant and am testing it out with a Aeotec Multisensor 6 connecting to a Nortex HUSBZB-1. I am using Z-WAVE JS and I can get the Multisensor to join my Z-Wave network, however it only gives me some of the data. It can detect Motion without issue, and it has sensors for tampering and Battery power, however it does not provide me with the Temp, Humidity or luminance information.

I am running 2021.3.4 if it helps

Any information any one can provide to how to gather that data from the sensor would be great.

[p4mr]

@Cyclops32 Does this post help ?

Aeotec MultiSensor 6 z-wave not detecting motion

I’ve also had issues with the Multisensor 6 recently, and had to troubleshoot with help from Aeotec. Not sure if this helps, but the process I used to resolve the issues was as follows Note I am using USB power for the device (the settings are different for Battery power), and using Z-Wave JS for integration Downloaded v5 of Simplicity Studio from Silicon Labs (I tried v4.78 that you can get from Aeotec’s website but it crashed under windows 10 on more than one occasion). It’s free to downlo…

[memnom]

• 1 - Check if entities are hidden in HomeAssistant
• 2 - Power cycle device
• 3 - unjoin device and re-join device

[k8gg]

and…

• 4 - Patience! Let it sit for a while.