Thanks for making this! I’ve been trying to find something like this but would like it for all doors being open after x time and before y time. Basically let me know if someone opens a door between 10:30PM and 6AM. Thoughts?
Your automation is not what this thread was talking about. Yours will check to see if the door is opened during a time period. They are looking for one that will tell if the is open.
Is there any way to get this to check a group i have 4 doors and 12 windows on binary sensors. I do not want 16 automations there must be away in HA or NR to check all and report back which ones are open. Like if your leaving home or at night ??
3 Likes
Have you tried making a binary sensor group (settings > devices & services > helpers > +create helper > binary sensor group) and then using that with this blueprint? Because it works exactly like you’d expect it to.
Note the notification portion of the blueprint is broken, but the binary sensor, triggering and event work fine.
A blueprint is the right solution for this problem as it’s a reusable component. There are many conceptual ways to solve any one problem, and a blueprint is the best way for this one.
2 Likes
Is it possible to add multiple notification receiver? E.g. me and my wife…
Please use a notify group for this function.
Hi @Neekster. Thanks for the blueprint. It should help those who need this functionality to create a their automation quickly and easily.
To those (above) asking “why do this when one can build an automation with the GUI instead”, one needs to remember that an automation is actually stored in YAML. The GUI is in itself only facilitating the building of that YAML by hiding many details, i.e. YAML syntax and structure, but it may still require some technical knowledge that users might lack. In contrast to the generic automation GUI, a blueprint is capable of masking even more details and can provide dropdowns and other options specific to a task.
In short, if you prefer a GUI build over the blueprint, I could ask why you don’t go directly to YAML. The reasoning is the same - to simplify what you want to do depending on your skill.
1 Like
I agree with Thorrrr, it would be nice to get a notification to know what door or window is open.
The solution you propose will certainly work but you only get a warning that a door or a window is open.
You will still have go looking around the place to see what is open.
If I understand Thorrrr correct, it’s more like the low battery blueprint (Low battery level detection & notification for all battery sensors) notifications that he asked for.
When set at it’s default settings, this blueprint will notify you what door is left open if you put in the friendly name.
This will not work in groups, but it can tell you the group name.
1 Like
Nice blueprint! Thanks for posting this @Neekster - was able to get this working in about 5min, exactly what I was looking for. Simply wanted a notification if the garage door was left open for X minutes.
Hi there, is there any way to put a template in the „friendly name“ field that searches the group for the real name of the Window or door?
Can this work with a group of sensors and notify which sensor is on? I notice it works well with a single sensor and can notify multiple people. If I use a group for the entity it works but does not identify which member of the group that triggered the automation.
1 Like
I think it would be a good idea if the automation would send an “all clear” when the state of the sensor is finally restored. Then you would know if e.g. the door was already shut by someone, or does it still need closing.
Any ideas on how to achieve this? Thank you.
1 Like
I’ve done this before, but opted to not include it into this blueprint. Take a look into “notification replacement” to avoid having notifications pile up and make a wait until trigger for when the door is closed again before sending a notification.
Hey there,
I wanted to express my gratitude for the fantastic work on the original blueprint. Inspired by @Neekster’s version, I’ve created an enhanced version with additional features and improvements. If you’re looking for:
- Clear Notifications: Clear the notification when, for instance, a door or window has been closed again, so you know there’s no need to worry.
- Flexible Notification Services: I’ve added the option to notify multiple devices directly without relying on notify groups. Simply list your desired notify services, separated by commas.
- Input Boolean Support: Now you can use both
binary_sensorandinput_booleandomains as trigger entities.
Check out the extended blueprint here for more details. I am looking forward to your feedback! 
1 Like
I wanted the notification to provide a more useful result so I spent some time figuring out how to display how many minutes the door has been left open.
Changed Msg title to “{{ friendly_name }} has been open for "
changed MSG to “{{ (as_timestamp(now()) - as_timestamp(as_datetime(initially_triggered_at, default))) | timestamp_custom(”%M”, false) }} minutes."
Hope that helps someone!
Just realized this likely only shows the HH:MM:SS minute value… not sure what happens after 61 mins… might display 1min… but anyways I still think it helps!
Change “%M” to “%H:%M” to get hours too…
2 Likes