Probleme installation pi4

[johnmook (chevin)]

bonjour , j’ai besoin d’aide !!!
j’ai commencer a installer home assistant sur mon PI4 et j’ai un message d’erreur

[Edwin_D]

Hi, welcome. Please translate your post to English, if needed through a translation service. This is an English only forum. If you want to use your native language, there are other Home Assistant forums for that as well.

How to help us help you - or How to ask a good question

Before we begin… This forum is not a helpdesk The people here don’t work for Home Assistant, that’s an open source project. We are volunteering our free time to help others. Not all topics may get an answer, never mind one that helps you solve your problem. [image] This also isn’t a general home automation forum, this is a forum for Home Assistant and things related to it. Any question about Home Assistant, and about using things with Home Assistant, is welcome here. We can’t help you with eve…

For the little I understand is tht you have trouble with a first install on a Raspberry PI. This post is a solution to a problem that has come by more often recently:

First time install Raspberry Pi 4

I was able to get this working with some help from this post. First I had to get home assistant to work with my TV by editing config.txt had to set values for my configuration. hdmi_group=2 hdmi_mode=16 Then on the command line I had to run the following commands. login which it appears takes you to the underlying operating system command shell. Then I had to enter nmcli con edit “Supervisor end0” Then print ivp4 I noticed there were no ip addresses listed for ipv4.dns. I then entered…