RF devices with Sonoff RF Bridge on Tasmota Firmware: get sensor state on startup

Configuration
9

@wills106
That sounds promising! I’ll give it a try!

I was also wondering if there an option to add a wildcard to the rules and get/set the data attribute dynamically as well as the topic?

Like:
on rfreceived#Data={DYNAMIC_VALUE}A do publish2 RFBridge/{DYNAMIC_ENTITY} On endon

10

I’ve been dealing with this exact issue all weekend. rules are great but not enough space for them all.

I did this in nodeRED. i do a mqtt-in - > JSON - > switch (reads code and sends to the correct node) - > change node (i strip the payload and then add the mqtt topic, qos, retain, and payload - > mqtt out to HA.

works and expandable too

11

@jwoodard80 that sounds like a much more scalable model. Do you have an example you could share please?

12

Absolutely! I’ll try to find a way to export it

14

@jwoodard80 thanks so very much. That’s awesome.
More than I could have created myself. Thanks for your assist.

15

Hopefully this shows better than it did last night… had issues with my internet connection. :slight_smile:

[{“id”:“e6c10435.fd7f98”,“type”:“tab”,“label”:“433mhz to MQTT”,“disabled”:false,“info”:“This takes 433mhz input and outputs to the correct MQTT topic”},{“id”:“7ceb86b2.01f3f8”,“type”:“mqtt in”,“z”:“e6c10435.fd7f98”,“name”:“Sonoff RF Incoming”,“topic”:“house/rfbridge1/tele/RESULT”,“qos”:“0”,“broker”:“2b51ea82.8463b6”,“x”:100,“y”:200,“wires”:[[“428ee070.8fd66”,“84f4f92c.ade0f8”]]},{“id”:“428ee070.8fd66”,“type”:“debug”,“z”:“e6c10435.fd7f98”,“name”:“”,“active”:false,“tosidebar”:true,“console”:false,“tostatus”:false,“complete”:“false”,“x”:320,“y”:130,“wires”:},{“id”:“84f4f92c.ade0f8”,“type”:“json”,“z”:“e6c10435.fd7f98”,“name”:“Convert to Object”,“property”:“payload”,“action”:“obj”,“pretty”:false,“x”:260,“y”:280,“wires”:[[“76b181d9.a1faa”,“47fd8e3d.42284”]]},{“id”:“76b181d9.a1faa”,“type”:“debug”,“z”:“e6c10435.fd7f98”,“name”:“JSON to Object”,“active”:false,“tosidebar”:true,“console”:false,“tostatus”:false,“complete”:“payload”,“x”:480,“y”:240,“wires”:},{“id”:“47fd8e3d.42284”,“type”:“switch”,“z”:“e6c10435.fd7f98”,“name”:“Select Door and State”,“property”:“payload.RfReceived.Data”,“propertyType”:“msg”,“rules”:[{“t”:“eq”,“v”:“30BE0A”,“vt”:“str”},{“t”:“eq”,“v”:“30BE0E”,“vt”:“str”},{“t”:“eq”,“v”:“33530A”,“vt”:“str”},{“t”:“eq”,“v”:“33530E”,“vt”:“str”},{“t”:“eq”,“v”:“2FEF0A”,“vt”:“str”},{“t”:“eq”,“v”:“2FEF0E”,“vt”:“str”},{“t”:“eq”,“v”:“30220A”,“vt”:“str”},{“t”:“eq”,“v”:“30220E”,“vt”:“str”},{“t”:“eq”,“v”:“2D670A”,“vt”:“str”},{“t”:“eq”,“v”:“2D670E”,“vt”:“str”},{“t”:“eq”,“v”:“33380A”,“vt”:“str”},{“t”:“eq”,“v”:“33380E”,“vt”:“str”},{“t”:“eq”,“v”:“32760A”,“vt”:“str”},{“t”:“eq”,“v”:“32760E”,“vt”:“str”},{“t”:“eq”,“v”:“2F010A”,“vt”:“str”},{“t”:“eq”,“v”:“2F010E”,“vt”:“str”},{“t”:“eq”,“v”:“2ED50A”,“vt”:“str”},{“t”:“eq”,“v”:“2ED50E”,“vt”:“str”},{“t”:“eq”,“v”:“2CF00A”,“vt”:“str”},{“t”:“eq”,“v”:“2CF00E”,“vt”:“str”},{“t”:“eq”,“v”:“32580A”,“vt”:“str”},{“t”:“eq”,“v”:“32580E”,“vt”:“str”}],“checkall”:“false”,“repair”:false,“outputs”:22,“x”:490,“y”:470,“wires”:[[“31e6e3da.39580c”],[“1e7a7f66.2c37d1”],[“2d21974f.0969d8”],[“f9c8103c.ed944”],[“23d35be0.d23004”],[“c500a26e.4ca64”],[“acb1b975.58bd68”],[“dae5d5ae.1a3f78”],[“7fc87cf9.05a724”],[“af3b73b3.2f0d6”],[“76d72240.1dbd1c”],[“4ace0758.f04d08”],[“9289e22.928fc2”],[“fb20963a.819728”],[“bf193261.8abd6”],[“60af8b2.da78474”],[“89b76642.dbc618”],[“d74df00f.a5e05”],[“a32a4909.5986c8”],[“2b5887cb.89d0b8”],[“5801191a.4fa798”],[“a205853c.977708”]],“outputLabels”:[“Girls Door Opened”,“Girls Door Closed”,“M. Bath Door Opened”,“M. Bath Door Closed”,“Front Garage Opened”,“Front Garage Closed”,“Shop Door Opened”,“Shop Door Closed”,“M. Bedroom Door Opened”,“M. Bedroom Door Closed”,“Front Door Opened”,“Front Door Closed”,“Back Door Opened”,“Back Door Closed”,“Office Door Opened”,“Office Door Closed”,“Boys Door Opened”,“Boys Door Closed”,“Garage Cover Opened”,“Garage Cover Closed”,“Garage Door Opened”,“Garage Door Closed”]},{“id”:“1af48cab.b6e013”,“type”:“debug”,“z”:“e6c10435.fd7f98”,“name”:“Test Open - Attach to node to test”,“active”:true,“tosidebar”:true,“console”:false,“tostatus”:false,“complete”:“payload”,“x”:1290,“y”:80,“wires”:},{“id”:“76232b7b.e90934”,“type”:“debug”,“z”:“e6c10435.fd7f98”,“name”:“Test Closed - Attach to node to test”,“active”:true,“tosidebar”:true,“console”:false,“tostatus”:false,“complete”:“payload”,“x”:1290,“y”:130,“wires”:},{“id”:“1e7a7f66.2c37d1”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Girls Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/Girls_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:800,“y”:100,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“31e6e3da.39580c”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Girls Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/Girls_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:810,“y”:60,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“ba9e79d4.7bd868”,“type”:“mqtt out”,“z”:“e6c10435.fd7f98”,“name”:“Send to Home Assistant”,“topic”:“”,“qos”:“”,“retain”:“”,“broker”:“2b51ea82.8463b6”,“x”:1430,“y”:530,“wires”:},{“id”:“f9c8103c.ed944”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“M. Bathroom Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/m_bath_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:1040,“y”:240,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“2d21974f.0969d8”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“M. Bathroom Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/m_bath_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:1040,“y”:200,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“dae5d5ae.1a3f78”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Shop Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/shop_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:790,“y”:490,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“acb1b975.58bd68”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Shop Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/shop_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:800,“y”:450,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“af3b73b3.2f0d6”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“M. Bedroom Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/m_bed_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:1040,“y”:320,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“7fc87cf9.05a724”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“M. Bedroom Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/m_bed_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:1040,“y”:280,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“d74df00f.a5e05”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Boys Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/Boys_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:800,“y”:180,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“89b76642.dbc618”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Boys Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/Boys_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:800,“y”:140,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“60af8b2.da78474”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Office Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/office_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:820,“y”:400,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“bf193261.8abd6”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Office Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/office_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:820,“y”:360,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“fb20963a.819728”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:" Back Door - Closed",“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/back_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:1050,“y”:560,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“9289e22.928fc2”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Back Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/back_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:1060,“y”:520,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“c500a26e.4ca64”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Front Garage Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/f_garage_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:810,“y”:800,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“23d35be0.d23004”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Front Garage Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/f_garage_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:810,“y”:760,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“4ace0758.f04d08”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Front Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/front_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:1050,“y”:640,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“76d72240.1dbd1c”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Front Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/front_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:1060,“y”:600,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“a205853c.977708”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Garage Door - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/garage_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:790,“y”:710,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“5801191a.4fa798”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Garage Door - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/garage_door”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:790,“y”:670,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“2b5887cb.89d0b8”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Garage Cover - Closed”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/garage_cover”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“OFF”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:800,“y”:890,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“a32a4909.5986c8”,“type”:“change”,“z”:“e6c10435.fd7f98”,“name”:“Garage Cover - Opened”,“rules”:[{“t”:“delete”,“p”:“payload”,“pt”:“msg”},{“t”:“set”,“p”:“topic”,“pt”:“msg”,“to”:“house/433mhz/garage_cover”,“tot”:“str”},{“t”:“set”,“p”:“qos”,“pt”:“msg”,“to”:“1”,“tot”:“str”},{“t”:“set”,“p”:“retain”,“pt”:“msg”,“to”:“true”,“tot”:“str”},{“t”:“set”,“p”:“payload”,“pt”:“msg”,“to”:“ON”,“tot”:“str”}],“action”:“”,“property”:“”,“from”:“”,“to”:“”,“reg”:false,“x”:800,“y”:850,“wires”:[[“ba9e79d4.7bd868”]]},{“id”:“2b51ea82.8463b6”,“type”:“mqtt-broker”,“z”:“”,“name”:“Home Assistant”,“broker”:“192.168.0.1”,“port”:“1883”,“clientid”:“”,“usetls”:false,“compatmode”:true,“keepalive”:“60”,“cleansession”:true,“birthTopic”:“”,“birthQos”:“0”,“birthPayload”:“”,“closeTopic”:“”,“closeQos”:“0”,“closePayload”:“”,“willTopic”:“”,“willQos”:“0”,“willPayload”:“”}]

2 Likes
16

Thanks @jwoodard80 worked like a charm. Much smarter way than using rules on the bridge, and easier to troubleshoot or add more devices.

Thanks gain for your help.

17

You’re very welcome… glad it helped you!

18

@jwoodard80
Thanks a lot!!!
I just gave your solution a try. Had to start now finally with Node-Red :slight_smile:

First tests are working like a charm!

19

Awesome! Glad I could help the community the way everyone has helped me.

20

I just replay this in another similar question, Mqtt.py log warning "No matching payload found for entity"
I was finally able to apply the patch suggested, but I copied all under MQTT for v0.9 under my custom-folder then commented those 4 lines in binary_sensor.py suggested by kanga_who, this was after successfully using nodRed suggestion by jwoodard80 but in my case having many rf senseros, it was just cleaner doing this directly with the binary_sensor.yaml, I downloaded ver 0.9 from https://github.com/home-assistant/home-assistant/releases and from the home-assistant-0.90.0.zip file i copied the complete mqtt folder inside homeassistant/components/ folder into my custom_components folder, them comment the 4 suggested lines, and I have no more warnings when I have an RF sensor, triggering in a different mqtt bibary_sensor. but fully agree with wmrato this should be reverted on the official release and not being patched

22

hello
i am using rf433 and a contact sensor
the data it send is the following:

20:46:30 MQT: tele/sonoff/RESULT = {"RfReceived":{"Sync":12300,"Low":410,"High":1220,"Data":"E8AC99","RfKey":"None"}}
20:46:35 MQT: tele/sonoff/RESULT = {"RfReceived":{"Sync":12350,"Low":420,"High":1220,"Data":"E8AC99","RfKey":"None"}}
20:46:38 MQT: tele/sonoff/RESULT = {"RfReceived":{"Sync":12250,"Low":410,"High":1220,"Data":"E8AC99","RfKey":"None"}}
20:46:42 MQT: tele/sonoff/RESULT = {"RfReceived":{"Sync":12260,"Low":410,"High":1230,"Data":"E8AC99","RfKey":"None"}}
20:46:54 MQT: tele/sonoff/RESULT = {"RfReceived":{"Sync":12230,"Low":410,"High":1230,"Data":"E8AC99","RfKey":"None"}}
20:46:56 MQT: tele/sonoff/RESULT = {"RfReceived":{"Sync":12270,"Low":410,"High":1230,"Data":"E8AC99","RfKey":"None"}}
20:47:00 MQT: tele/sonoff/RESULT = {"RfReceived":{"Sync":12360,"Low":420,"High":1220,"Data":"E8AC99","RfKey":"None"}}

can someone help me defining my binary sensor please?
thank you

23

Here…

binary_sensor:
  - platform: mqtt
    name: sensor_name
    state_topic: "tele/sonoff/RESULT"
    value_template: '{{value_json.RfReceived.Data}}'
    payload_on: E8AC99

It’s looks like you might have an “open” sensing only sensor, so you might want to consider a timer (automation) to reset it to closed (or it gets a bit pointless).

24

thanks a lot @AussieByrd i will test it tonight
what kind of automation can i have ?
currently i have this:

  - platform: mqtt
    name: Correio
    state_topic: "tele/sonoff/RESULT"
    value_template: '{{value_json.RfReceived.Data}}'
    payload_on: E8AC99

eventually, but i dont know how to do it, i could have an automation that everyday cleans this notifications. in alternative, and this would be the best for me, having instead of the notifications somethink like:

Card:

YOU GOT MAIL – YES
then a button that reset the value and give
“MAIL CHECKED” DURING THE REST OF THE DAY
THEN AT MIDNIGHT IT RESET’S AND SAYS “YOU DONT HAVE MAIL”

Asking to much right?

25

I haven’t played with these too much, but you might want to take a look at Alerts. And acknowledging alerts.

26

Check out the attribute off_delay in the mqtt binary sensor documentation. This seems like exactly what you might want.

27

You probably already have an answer, but another solution is to listen for the RF bridge’s native MQTT messages and create automations (or even a single templated automation) in Home Assistant which publish retained messages for individual sensors. I’ve moved to this method because it’s easier to maintain them in a centralized place than to have separate rules contained in various tasmota devices.

28

Hi, and could you please publish some example of automation’s base on native MQTT messages from RF bridge?
thanks

29

Check out this thread:

30

There is any way to make tasmota identify the RF devices like the zibgee does? I want to have individual topic for every device, but not with rules because this means that I already know the codes, and I don’t. I have all sensors setup in positions, working, I know the open/close codes, but I don’t know the Low Battery codes, and with a setting which forces tasmota to send diferent topics for every device, I can know when a device will tell me a different code from what I know already…

There is something like this in tasmota RF Bridge?