Shelly Plus H&T

Configuration
1

I have configured my thermostat according to a few youtube videos and HA just discovered a new device, but there are no entities for it. So what am I doing wrong ?

Also from my thermostat AP it says connected to MQTT

Here is the last entries in my broker log

2023-09-26 16:08:06: Client closed its connection.
2023-09-26 16:10:06: New connection from xxxxx:41830 on port 1883.
2023-09-26 16:10:06: Client closed its connection.
2023-09-26 16:12:06: New connection from xxxxx:34812 on port 1883.
2023-09-26 16:12:06: Client closed its connection.
2023-09-26 16:12:59: New connection from 192.168.1.41:53319 on port 1883.
2023-09-26 16:12:59: New client connected from 192.168.1.41:53319 as shellyplusht-c049ef8afee0 (p2, c1, k60, u’mqttdude’).
2023-09-26 16:14:06: New connection from xxxxx:47224 on port 1883.
2023-09-26 16:14:06: Client closed its connection.
2023-09-26 16:15:52: Client shellyplusht-c049ef8afee0 closed its connection.
2023-09-26 16:16:06: New connection from xxxxx:57622 on port 1883.
2023-09-26 16:16:06: Client closed its connection.
2023-09-26 16:16:11: New connection from 192.168.1.41:64341 on port 1883.
2023-09-26 16:16:11: New client connected from 192.168.1.41:64341 as shellyplusht-c049ef8afee0 (p2, c1, k60, u’mqttdude’).
2023-09-26 16:18:06: New connection from xxxxx:36264 on port 1883.
2023-09-26 16:18:06: Client closed its connection.
2023-09-26 16:19:11: Client shellyplusht-c049ef8afee0 closed its connection.

2

Do you have the device showing yet in the Shelly integration?

It won’t be auto-added in my experience even after detected.

I always need to ADD DEVICE in the Shelly Integration (Settings – Devices and Services) with the IP address before I have access to the entities.

Then I can see the on the device page in Devices and Services all the associated entities / 2 sensors (temp and humidity) and 1 diagnostic (battery) are listed.

Hope that helps.
Thanks
Travis

3

Yes, its showing 1 device with no entities, also it auto-detected a shelly plus 1 which now appears as 1 device and 9 entities.

5

Found this

6

Did matching those settings solve it for you?

My devices were configured prior to 2022.11.0 and they populated with entities when added.

7

I made it work from what I found in that link