I’m using the standard Shelly integration, but I patched it with some code from the DEV branch, as the feature isn’t integrated yet, as far as I can see:
The setup works great with a Shelly Plus Uni, which has the advantage of using the ‘COUNT IN’ signal on Pin 8 to read impulses from an inductive sensor.
For my Sensus 620 water meter, I used a 3D-printed adapter (see here ) to install it.
[20241015_220938-COLLAGE]
(Not the cleanest, but a quick setup. I also added a temperature sensor!)
EDIT:
By the way, I just remembered that I had to patch the Shelly integration, since the COUNT IN feature is only supported in the dev version of the inte…
