Hi, Can anyone please give me an idiots guide on configuring a Sonoff iFan03 with Tasmota firmware so that it will work with MQTT? I’ve put a fan: entry into my configuration.yaml file but the entity it defines is still shown as ‘unavailable’ in the device view. Is anyone able to walk me through …

I found the problem with your fan…(I hope…) you need to change the following lines in your conrig from: state_topic: "stat/conservatoryfan/status" speed_state_topic: "stat/conservatoryfan/status" to this; state_topic: "stat/conservatoryfan/RESULT" speed_state_topic: "stat/conservatoryfan…

Why do you guys set FanSpeed to 4 for on? That doesn’t do anything for me?? When I replace 4 with 1 it does turn on (to low). 4 **qos** : 0, **retain** : false, **cmd** : publish, **dup** : false, **topic** : cmnd/tasmota_8FAD22/FanSpeed, **messageId** : , **length** : 31 {"FanSpeed":…

I am sorry to be a pain, as I’m still new to HASSIO. Can you please guide me as to what MQTT parameters you used in the Tasmota ifan03 config ? I think you used: Client-mbrfan topic-mbrfan Is there any other name options in Tasmota that I need to adjust to get the if03 working? I have mqtt work…

[Screenshot_20200611-223438~2] Just make sure your tasmota mqtt full topic is “%prefix%/%topic%/”, sometimes it gets swapped and causes dramas

Thanks so much for sharing - I’ll have a crack over the weekend !

All sorted - thank you so much for your help !!

finity - you are a genius and your code helped a newbie get up and running - thank you ! Just wondering if your control row can be enlarged? I am trying to get the buttons to be bigger. I tried using ‘icon_height: 60px’ but to no avail. Any suggestions? Thanks again ! Jason

Thanks! Not yet. But I might be looking into it at some point. I’ve had one other person ask about that too already.

‘might’ is good enough for me… Thank You again for the code and effort !

Thanks for the great info posted here - I got my iFan03 to work nicely. I had to modify the yaml slightly, as sending FanSpeed 4 doesn’t seem to do anything. I made the default on state is “1” (low) instead, by modifying: payload_on: "4" to payload_on: "1" (and then change the 4’s in state_value…

Sonoff iFan03 with Tasmota Configuration (using MQTT)

Configuration

rob1303 March 15, 2021, 11:45am 61

Hi sumasage.

This happened to a few of us.

Have you seen this:

Basically we needed to update our fan configs to include “”

This fixed it for me and a few others, hope it helps.