Sonoff ZBBridge how to fully remove the device

Enjoy-Combi · September 20, 2021, 9:27am

Hi,

I was first using the coordinator Sonoff ZBBridge within the zha integration. I decided to replace it by a CC2530 + CC2591 coordinator.
I first removed the zigbee devices and ended by removing the zha integration.
I have created a new zha integration with the coordinator CC250 + CC2591 and pair the devices.
All work good but the previous coordinator still appears as Silicon Labs EZSP
device :

Is there a way to remove it as I don’t use it anymore ?
Many thanks

francisp · September 20, 2021, 9:31am

Is the ZBBridge still powered on ?

ardysusilo · September 20, 2021, 10:04am

I also have the same experience previously when trying to migrate Zigbee Coordinator (from Sonoff ZBBridge). Here are the steps-

Remove ZHA Integration
Remove zigbee.db inside /config/ folder (also back it up)
Restart Home Assistant
Re-add ZHA Integration

Enjoy-Combi · September 20, 2021, 12:08pm

Hi,

no powered anymore.

Enjoy-Combi · September 20, 2021, 12:08pm

Thanks, will do like this.

Jonah1970 · September 20, 2021, 12:34pm

I have the same problem, the old Sonoff Zigbee Bridge still shows as part of the mesh but I powered this down and migrated to the CC2531 months ago. I will also try Ardy’s suggestion but I guess it will mean that everything needs to be re-paired again.

Enjoy-Combi · September 20, 2021, 1:45pm

Hi finally fixed it with this method : Fixing Zigbee Errors
Quite fast. Do not remove any tables, just look for the ieee you are looking to remove and that’s all.

Don’t forget to remove entry in /config/.storage/zha.storage and in /config/.storage/core.device_registry as well.

Of course, backup everything first.